2 step & pressure switch

littlemanjoe · 07-16-2023, 03:06 PM

Has anyone ever had an issue with your 2 step not turning off clean during the launch?

I have developed a studder during the launch.

It shows the O2's going rich almost like it's a ignition thing.

Willyracer · 07-16-2023, 06:29 PM

I assume you have a data recorder in the car. We bring the
12v signal from the pressure switch / 2 step into a digital input
Then you can see the 12 v drop and rpm increase. Our O2 sensor goes
rich on the hit also.I assumed it has to do with the vacuum secondary
in the carb
David

SDT1DYI · 07-17-2023, 10:46 AM

Quote:

Originally Posted by littlemanjoe

Has anyone ever had an issue with your 2 step not turning off clean during the launch?

I have developed a studder during the launch.

It shows the O2's going rich almost like it's a ignition thing.

Yes, a bad Pressure switch can cause this. I would change it out .

Steve Teeter. Stk/SS 620

littlemanjoe · 07-17-2023, 11:21 AM

David, I do have a Racepak. I will order the 12 volt event sensor.

Steve, good point. I will change it out while I'm at it.

Thanks,
Mike

Plyguy63 · 07-17-2023, 03:42 PM

Quote:

Originally Posted by littlemanjoe

David, I do have a Racepak. I will order the 12 volt event sensor.

Steve, good point. I will change it out while I'm at it.

Thanks,
Mike

Some pressure switches have buna type o-rings or wetted parts. Buna rubber is not compatible with brake fluid. EPDM rubber is compatible with brake fluid. Virtually all brake o-rings, seals, etc are edpm rubber. Not sure as to what extent that has with the switch, but I know one person who had a switch go bad and his had buna rubber parts.

B Parker · 07-19-2023, 06:29 PM

I get your using brake pressure switch but are you using one in conjunction with a button on the brake pedal. If you are that's the first thing I would get rid of.

Coleydog · 07-24-2023, 10:04 AM

What is the switch to buy?

Plyguy63 · 07-24-2023, 03:28 PM

I was doing research on switches and most have buna rubber. I think there is a place on the east coast that has epdm rubber pressure switches. I think that it is saved on my work computer. I will check and see.

littlemanjoe · 07-24-2023, 11:22 PM

If someone could share what brand pressure switch they have had good results with it would be greatly appreciated!
Thanks,
Mike

weedburner · 07-25-2023, 11:16 AM

I use a Harley brake lite switch, no problem in the 5 years it's been in place.
I've also used Napa SL147 and SL143, both VW brake lite switches.

Grant

07-16-2023, 03:06 PM	#1
littlemanjoe Member Join Date: Feb 2018 Location: West Layfayette Posts: 105 Likes: 159 Liked 40 Times in 18 Posts	2 step & pressure switch Has anyone ever had an issue with your 2 step not turning off clean during the launch? I have developed a studder during the launch. It shows the O2's going rich almost like it's a ignition thing.

07-16-2023, 06:29 PM	#2
Willyracer Junior Member Join Date: Feb 2019 Posts: 87 Likes: 7 Liked 57 Times in 24 Posts	Re: 2 step & pressure switch I assume you have a data recorder in the car. We bring the 12v signal from the pressure switch / 2 step into a digital input Then you can see the 12 v drop and rpm increase. Our O2 sensor goes rich on the hit also.I assumed it has to do with the vacuum secondary in the carb David

07-17-2023, 11:21 AM	#4
littlemanjoe Member Join Date: Feb 2018 Location: West Layfayette Posts: 105 Likes: 159 Liked 40 Times in 18 Posts	Re: 2 step & pressure switch David, I do have a Racepak. I will order the 12 volt event sensor. Steve, good point. I will change it out while I'm at it. Thanks, Mike

07-19-2023, 06:29 PM	#6
B Parker Senior Member Join Date: Sep 2009 Posts: 835 Likes: 921 Liked 2,314 Times in 455 Posts	Re: 2 step & pressure switch I get your using brake pressure switch but are you using one in conjunction with a button on the brake pedal. If you are that's the first thing I would get rid of.

07-24-2023, 10:04 AM	#7
Coleydog Senior Member Join Date: Jul 2014 Posts: 563 Likes: 34 Liked 47 Times in 32 Posts	Re: 2 step & pressure switch What is the switch to buy?

07-24-2023, 03:28 PM	#8
Plyguy63 Junior Member Join Date: Jul 2018 Posts: 27 Likes: 0 Liked 8 Times in 4 Posts	Re: 2 step & pressure switch I was doing research on switches and most have buna rubber. I think there is a place on the east coast that has epdm rubber pressure switches. I think that it is saved on my work computer. I will check and see.

07-24-2023, 11:22 PM	#9
littlemanjoe Member Join Date: Feb 2018 Location: West Layfayette Posts: 105 Likes: 159 Liked 40 Times in 18 Posts	Re: 2 step & pressure switch If someone could share what brand pressure switch they have had good results with it would be greatly appreciated! Thanks, Mike

07-25-2023, 11:16 AM	#10
weedburner Junior Member Join Date: Apr 2016 Posts: 54 Likes: 1 Liked 14 Times in 11 Posts	Re: 2 step & pressure switch I use a Harley brake lite switch, no problem in the 5 years it's been in place. I've also used Napa SL147 and SL143, both VW brake lite switches. Grant __________________ Grant website- http://ClutchTamer.com We make your non-adjustable clutch...ADJUSTABLE!