Accusump/accumulator questions!

Nmbr1GMfan · 01-07-2021, 01:32 PM

The Dart block has an oil port above the oil filter but it's only like 3/8", is anyone using this to plumb their accumulator? I think a -10 on a sandwich adapter might be a better option but what adapter is everyone using if not the block port? The block port can be seen in this photo.

Chuck Gallagher · 01-07-2021, 02:50 PM

Todd;
Moroso sells an oil filter adapter that solves this nicely. The port you are talking about is a factory machining drill access.

Keith 944 · 01-07-2021, 02:54 PM

Look up canton products they make a nice one

Nmbr1GMfan · 01-07-2021, 03:41 PM

I was guessing something like this...
https://www.jegs.com/i/Moroso/710/23691/10002/-1

brett3533 · 01-07-2021, 04:41 PM

My BBC dart block has a oil galley access at the top of the block in the rear to plumb an accumulator

Chuck Gallagher · 01-07-2021, 06:59 PM

Todd;
Depending on which filter you use, I was thinking of the Moroso P/N 23675 or 23676 adapter. If he is still working, I'd give Howard Marcelus a call at Moroso.
Brett McFarland may have an answer also since he is familiar with the Dart BBC.

Matt S · 01-07-2021, 09:46 PM

I used the same one that Brett mentions. For me, there was no chance of getting fittings to fit on an oil filter adapter with headers and clutch linkage in the way. This was on a Dart Little M SBC.

Nmbr1GMfan · 01-07-2021, 11:49 PM

Quote:

Originally Posted by brett3533

My BBC dart block has a oil galley access at the top of the block in the rear to plumb an accumulator

Brett, My small block doesn't have that.

Nmbr1GMfan · 01-07-2021, 11:53 PM

Quote:

Originally Posted by Chuck Gallagher

Todd;
Depending on which filter you use, I was thinking of the Moroso P/N 23675 or 23676 adapter. If he is still working, I'd give Howard Marcelus a call at Moroso.
Brett McFarland may have an answer also since he is familiar with the Dart BBC.

Chuck I like the #23676, just wasn't sure if it would clear the lip around the filter boss.

curtis reed · 01-08-2021, 09:12 AM

Quote:

Originally Posted by Nmbr1GMfan

I was guessing something like this...
https://www.jegs.com/i/Moroso/710/23691/10002/-1

They changed the design a little but that is what I have been using for years with mine.

01-07-2021, 01:32 PM	#1
Nmbr1GMfan VIP Member Join Date: Aug 2013 Posts: 1,766 Likes: 1,197 Liked 1,957 Times in 492 Posts	Accusump/accumulator questions! The Dart block has an oil port above the oil filter but it's only like 3/8", is anyone using this to plumb their accumulator? I think a -10 on a sandwich adapter might be a better option but what adapter is everyone using if not the block port? The block port can be seen in this photo. __________________ Todd Greene

01-07-2021, 02:54 PM	#3
Keith 944 VIP Member Join Date: Feb 2006 Location: Dela-where? Posts: 2,115 Likes: 1,004 Liked 1,641 Times in 520 Posts	Re: Accusump/accumulator questions! Look up canton products they make a nice one __________________ KEITH MAYERS 2 X somebody many X nobody

01-07-2021, 03:41 PM	#4
Nmbr1GMfan VIP Member Join Date: Aug 2013 Posts: 1,766 Likes: 1,197 Liked 1,957 Times in 492 Posts	Re: Accusump/accumulator questions! I was guessing something like this... https://www.jegs.com/i/Moroso/710/23691/10002/-1 __________________ Todd Greene

01-07-2021, 04:41 PM	#5
brett3533 Member Join Date: Jan 2007 Location: maysville Posts: 109 Likes: 15 Liked 33 Times in 9 Posts	Re: Accusump/accumulator questions! My BBC dart block has a oil galley access at the top of the block in the rear to plumb an accumulator __________________ Brett McFarland A/S

01-07-2021, 06:59 PM	#6
Chuck Gallagher Junior Member Join Date: Apr 2013 Location: NC (nothing compares) Posts: 48 Likes: 33 Liked 133 Times in 28 Posts	Re: Accusump/accumulator questions! Todd; Depending on which filter you use, I was thinking of the Moroso P/N 23675 or 23676 adapter. If he is still working, I'd give Howard Marcelus a call at Moroso. Brett McFarland may have an answer also since he is familiar with the Dart BBC.

01-07-2021, 02:50 PM	#2
Chuck Gallagher Junior Member Join Date: Apr 2013 Location: NC (nothing compares) Posts: 48 Likes: 33 Liked 133 Times in 28 Posts	Re: Accusump/accumulator questions! Todd; Moroso sells an oil filter adapter that solves this nicely. The port you are talking about is a factory machining drill access. Last edited by Chuck Gallagher; 01-07-2021 at 02:53 PM.

01-07-2021, 09:46 PM	#7
Matt S Junior Member Join Date: Apr 2006 Posts: 96 Likes: 0 Liked 20 Times in 12 Posts	Re: Accusump/accumulator questions! I used the same one that Brett mentions. For me, there was no chance of getting fittings to fit on an oil filter adapter with headers and clutch linkage in the way. This was on a Dart Little M SBC.