305 parts

jamie2370 · 09-27-2022, 09:10 AM

416 heads pac1409x, stainless int 184, nitrided exh 150, studs/guideplates basic valve job, nothing major, 5 passes on valves and springs. $800
450 heads bare but have been worked, older work but decent $400

Bullet "latest" 357/390 cam nitrided 3 passes after back from Bullet
Bullet solid lifters 3 passes $250 for both SOLD

Venolia dish pistons 3.780 bore 1.2mm total seal rings 10 passes, top ring spacers, New set of top rings(just paid $400) not installed or filed, Eagle steel rods new 10 passes ago $800 rods/pistons/rings

GM cast crank, 3.493 worked, ready to go, 10 passes $200

Deano Quadrajet was built for 69 350/255 engine $400 SOLD

TA converter 200 metric was built for 69 350/255 2 passes $400 SOLD

Would rather not ship crank or heads, may can deliver to Orlando Divisonal

09-27-2022, 09:10 AM	#1
jamie2370 Member Join Date: Dec 2014 Location: Perry, GA Posts: 329 Likes: 11 Liked 238 Times in 89 Posts	305 parts 416 heads pac1409x, stainless int 184, nitrided exh 150, studs/guideplates basic valve job, nothing major, 5 passes on valves and springs. $800 450 heads bare but have been worked, older work but decent $400 Bullet "latest" 357/390 cam nitrided 3 passes after back from Bullet Bullet solid lifters 3 passes $250 for both SOLD Venolia dish pistons 3.780 bore 1.2mm total seal rings 10 passes, top ring spacers, New set of top rings(just paid $400) not installed or filed, Eagle steel rods new 10 passes ago $800 rods/pistons/rings GM cast crank, 3.493 worked, ready to go, 10 passes $200 Deano Quadrajet was built for 69 350/255 engine $400 SOLD TA converter 200 metric was built for 69 350/255 2 passes $400 SOLD Would rather not ship crank or heads, may can deliver to Orlando Divisonal Last edited by jamie2370; 09-28-2022 at 09:33 AM. Reason: sold parts