Manual steering box for a body drag racing – 24 to 1 or 16 t - Page 2

SDT1DYI · 08-01-2023, 10:03 PM

As mentioned previously, you should check how many degrees of Caster are in the car currently.
If it's very little or Stock specs, put some Additional caster in it before you do anything else and make a pass.
21/2 degrees caster will improve high speed steering.
Then work on the other concerns you have as to how the car handles and drives.

Steve Teeter Stk/SS 620

CraigG · 08-07-2023, 08:51 PM

Thanks - I have 4 1/2 degrees caster as measured from the 4 wheel alignment.

I will re-check the caster as well.

Appreciated.

08-01-2023, 10:03 PM	#11
SDT1DYI Member Join Date: Nov 2016 Location: Indianola Washington Posts: 356 Likes: 0 Liked 394 Times in 124 Posts	Re: Manual steering box for a body drag racing – 24 to 1 or As mentioned previously, you should check how many degrees of Caster are in the car currently. If it's very little or Stock specs, put some Additional caster in it before you do anything else and make a pass. 21/2 degrees caster will improve high speed steering. Then work on the other concerns you have as to how the car handles and drives. Steve Teeter Stk/SS 620

08-07-2023, 08:51 PM	#12
CraigG Junior Member Join Date: May 2007 Location: Iowa Posts: 23 Likes: 0 Liked 3 Times in 2 Posts	Re: Manual steering box for a body drag racing – 24 to 1 or Thanks - I have 4 1/2 degrees caster as measured from the 4 wheel alignment. I will re-check the caster as well. Appreciated.