Master cylinder

[tolaas]

I have Strange duel calipers at the rear and Mark Wiliams single calipers at front, have strange mastercylinder 1,125, is it to small master cylinder? I think i have long way for the pedal.
Thanks, Torbjorn

[340Cuda]

My car has Strange duel calipers in back Strange singles in front. I have a Strange master cylinder but I don't remember what size. No problems but I do run 2 PSI residual valves front and rear and that helps me keep a good pedal.

All hard lines except for -3 from the frame to the wheels.

However I may be causing some brake drag with those valves, don't know.

[SDT1DYI]

Dual rear Calipers require larger volume than a single fronts. I would call both Strange and M W and confirm piston volumes. Ask Strange which port , front or back has more volume output and tube it accordingly. Based on the Piston areas , Strange should tell you if MS bore size has enough volume.

Steve Teeter Stk/SS 620

[Dan Fahey]

Originally Posted by SDT1DYI

Dual rear Calipers require larger volume than a single fronts. I would call both Strange and M W and confirm piston volumes. Ask Strange which port , front or back has more volume output and tube it accordingly. Based on the Piston areas , Strange should tell you if MS bore size has enough volume.

Steve Teeter Stk/SS 620

If interested
Have a New WIldwood Master Cylinder for sale.

Dan

[CMcAllister]

Originally Posted by SDT1DYI

Dual rear Calipers require larger volume than a single fronts. I would call both Strange and M W and confirm piston volumes. Ask Strange which port , front or back has more volume output and tube it accordingly. Based on the Piston areas , Strange should tell you if MS bore size has enough volume.

Steve Teeter Stk/SS 620

Port towards the pushrod goes to the side needing more volume. In this case, the rear.