Winter garage sale

Bob Lasko · 11-15-2017, 10:38 PM

Parts for Sale

Chevy Vortech heads done by Dave Jack. 50cc chambers. Victory Titanium valves, intake 2.080 and exhaust 1.580 Angle milled one degree, @.140. Has Titanium retainers with Manley Nextex 1.625 triple springs. Heads have fresh Valve job and head surface has had a cleanup cut. Have CP pistons to match combustion chambers, will separate. Call or e-mail for flow numbers. Asking $5500 with pistons and just heads $4500 or best offer.

CP Pistons bore 4.105. Comes with.927 pins. Call or e-mail for specs
MGP RODS 5.7 length, 2.0150 rod journal and .927 pin $200
Biondo Adjustable Trans brake button $50.00
Biondo regulator Trans brake button $20
ACD shift controller for 3 speed, no chips $175
ACD shift controller for 3 speed using chips $75
SBC Crower Sever duty roller lifters part # 66291 no off set $200
Braswell 750Holley carb with external air bleeds $550
Biondo RPM shift controller by Digital Delay for 3 speed $100
SBC 55 mm Bullet Roller Cam. Gross Valve lift intake .776, 7-2 swap $400
SBC Comp Cams Roller Cam standard journal Gross lift intake .706 $140
Manely Nextek Valve springs 1.677 triple. Will hold 320 at 2.100 $125
US Gear pro gears 650 #07-990650 no cracks. Good pattern $125
Russell Full Flow hose end 90 degrees 16an, new $30
Remote for Super winch $100

All prices do not include shipping.

Bob Lasko
203-858-1952
lasko@optonline.net

11-15-2017, 10:38 PM	#1
Bob Lasko Senior Member Join Date: Jan 2002 Location: Wilton,CT Posts: 608 Likes: 0 Liked 168 Times in 49 Posts	Winter garage sale Parts for Sale Chevy Vortech heads done by Dave Jack. 50cc chambers. Victory Titanium valves, intake 2.080 and exhaust 1.580 Angle milled one degree, @.140. Has Titanium retainers with Manley Nextex 1.625 triple springs. Heads have fresh Valve job and head surface has had a cleanup cut. Have CP pistons to match combustion chambers, will separate. Call or e-mail for flow numbers. Asking $5500 with pistons and just heads $4500 or best offer. CP Pistons bore 4.105. Comes with.927 pins. Call or e-mail for specs MGP RODS 5.7 length, 2.0150 rod journal and .927 pin $200 Biondo Adjustable Trans brake button $50.00 Biondo regulator Trans brake button $20 ACD shift controller for 3 speed, no chips $175 ACD shift controller for 3 speed using chips $75 SBC Crower Sever duty roller lifters part # 66291 no off set $200 Braswell 750Holley carb with external air bleeds $550 Biondo RPM shift controller by Digital Delay for 3 speed $100 SBC 55 mm Bullet Roller Cam. Gross Valve lift intake .776, 7-2 swap $400 SBC Comp Cams Roller Cam standard journal Gross lift intake .706 $140 Manely Nextek Valve springs 1.677 triple. Will hold 320 at 2.100 $125 US Gear pro gears 650 #07-990650 no cracks. Good pattern $125 Russell Full Flow hose end 90 degrees 16an, new $30 Remote for Super winch $100 All prices do not include shipping. Bob Lasko 203-858-1952 lasko@optonline.net Last edited by Bob Lasko; 11-16-2017 at 09:30 PM.