360 mopar oiling issue - Page 3

CMcAllister · 08-02-2018, 12:50 PM

I'm not sure, but they were small. .035 maybe. Slightly more for the heads. I wanted to get oil on the crank and keep it there instead of squirting off in other directions. A lot of oil will come through a .035 hole with 60 PSI behind it. .125" holes in the cam bearings is a number I've seen and that sounds way bigger than it needs to be. .125" x 4 is a big oil leak.

dondon · 08-07-2018, 10:56 PM

dynoed new motor today, made 8 pulls. Pulled oil pan and number 3 rod bearing looked real nice. Happy for the time being.

GTSDart · 08-08-2018, 10:14 AM

Quote:

Originally Posted by dondon

dynoed new motor today, made 8 pulls. Pulled oil pan and number 3 rod bearing looked real nice. Happy for the time being.

Good to hear...

CMcAllister · 08-08-2018, 05:02 PM

We used a System 1 filter. Made it pretty easy to tell what was going on. Easier than pulling the pan to look.

08-02-2018, 12:50 PM	#21
CMcAllister Senior Member Join Date: Sep 2006 Location: Fulton County, PA Posts: 531 Likes: 9 Liked 735 Times in 205 Posts	Re: 360 mopar oiling issue I'm not sure, but they were small. .035 maybe. Slightly more for the heads. I wanted to get oil on the crank and keep it there instead of squirting off in other directions. A lot of oil will come through a .035 hole with 60 PSI behind it. .125" holes in the cam bearings is a number I've seen and that sounds way bigger than it needs to be. .125" x 4 is a big oil leak.

08-07-2018, 10:56 PM	#22
dondon Junior Member Join Date: Dec 2012 Posts: 26 Likes: 8 Liked 10 Times in 5 Posts	Re: 360 mopar oiling issue dynoed new motor today, made 8 pulls. Pulled oil pan and number 3 rod bearing looked real nice. Happy for the time being.

08-08-2018, 05:02 PM	#24
CMcAllister Senior Member Join Date: Sep 2006 Location: Fulton County, PA Posts: 531 Likes: 9 Liked 735 Times in 205 Posts	Re: 360 mopar oiling issue We used a System 1 filter. Made it pretty easy to tell what was going on. Easier than pulling the pan to look.