Lightened ring gear, riffle drilled and star flanged axles?

FLEMING · 11-30-2015, 10:22 PM

delete

Todd Geisler · 12-01-2015, 12:15 AM

If your looking to refine the combination and get what ever gains possible, then those things are well worth trying for the little cost they ad at the time of purchase.

Star flange axles, I assume you mean Moser. Don't care for them due to rather crude machining and lack of attention to detail. Strange and Mark Williams do a better job in that area.

That said, we have a customer with an Outlaw 10.5 car that had Moser 40 spline gun drilled axles withe star flanges that never once twisted or broke an axle. Car ran 4.0's in the 1/8th at 2700 lbs and 60' 1.00 on a regular basis. So strength is not a concern.

Back to back testing, I have not and don't know anyone who has.

Chevy55 · 12-01-2015, 08:58 AM

IMO If you need to get weight out of the car this is an excellent way to do it.
Also if you'd like to move weight around what better way than to turn unsprung weight into sprung weight.
The lighter the unsprung weight the softer the shock the better and more consistent the bite.

That's the way I look at it.

1320racer · 12-01-2015, 09:04 AM

no ET between lightened ring gear and standard in my 3144 lb. Super Stock car with Mark Williams Ultimate Hi Torque gun drilled axles, and aluminum spooled "Pro Stock" 3rd member.

FLEMING · 12-01-2015, 10:02 AM

Thanks,... I think my money would be best spent on a metric, over the th350..

Randall Klein · 12-01-2015, 11:58 AM

I do not know how to search past posts, but this was gone over extensively on this site at one time.

I believe the concensus was no noticable difference

Mickey Whaley · 12-01-2015, 12:12 PM

Quote:

Originally Posted by FLEMING

Thanks,... I think my money would be best spent on a metric, over the th350..

save it a good one is the same

Bob Gullett · 12-01-2015, 12:35 PM

Quote:

Originally Posted by FLEMING

Thanks,... I think my money would be best spent on a metric, over the th350..

Or a jerico! Lol.

impstocker · 12-01-2015, 10:35 PM

I use to run a 11 pound aluminum flywheel in my 4000 lb 68 Impala 396/325. All the "experts" told me I needed to run a 30 lb flywheel to get that Chevy moving. Never had a problem with light flywheel. Car never bogged, left pretty hard. The "experts" most of the time were guys who ran Automatics.
I also use rifle drilled axles, star flange too, same rear in my 65 Impala now. I felt for the little extra wht not. Just my 2 cents.

Will Lamprecht I/SA 65 Impala in progress

11-30-2015, 10:22 PM	#1
FLEMING Member Join Date: Aug 2003 Posts: 262 Likes: 47 Liked 54 Times in 25 Posts	delete delete Last edited by FLEMING; 12-02-2015 at 02:24 PM. Reason: delete

12-01-2015, 12:15 AM	#2
Todd Geisler Member Join Date: Feb 2002 Posts: 328 Likes: 64 Liked 345 Times in 149 Posts	Re: Lightened ring gear, riffle drilled and star flanged axl If your looking to refine the combination and get what ever gains possible, then those things are well worth trying for the little cost they ad at the time of purchase. Star flange axles, I assume you mean Moser. Don't care for them due to rather crude machining and lack of attention to detail. Strange and Mark Williams do a better job in that area. That said, we have a customer with an Outlaw 10.5 car that had Moser 40 spline gun drilled axles withe star flanges that never once twisted or broke an axle. Car ran 4.0's in the 1/8th at 2700 lbs and 60' 1.00 on a regular basis. So strength is not a concern. Back to back testing, I have not and don't know anyone who has.

12-01-2015, 08:58 AM	#3
Chevy55 Banned Join Date: Nov 2014 Posts: 324 Likes: 625 Liked 179 Times in 89 Posts	Re: Lightened ring gear, riffle drilled and star flanged axl IMO If you need to get weight out of the car this is an excellent way to do it. Also if you'd like to move weight around what better way than to turn unsprung weight into sprung weight. The lighter the unsprung weight the softer the shock the better and more consistent the bite. That's the way I look at it.

12-01-2015, 09:04 AM	#4
1320racer VIP Member Join Date: Nov 2007 Location: New Jersey Posts: 2,628 Likes: 160 Liked 759 Times in 379 Posts	Re: Lightened ring gear, riffle drilled and star flanged axl no ET between lightened ring gear and standard in my 3144 lb. Super Stock car with Mark Williams Ultimate Hi Torque gun drilled axles, and aluminum spooled "Pro Stock" 3rd member. Last edited by 1320racer; 12-01-2015 at 09:07 AM.

12-01-2015, 10:02 AM	#5
FLEMING Member Join Date: Aug 2003 Posts: 262 Likes: 47 Liked 54 Times in 25 Posts	Re: Lightened ring gear, riffle drilled and star flanged axl Thanks,... I think my money would be best spent on a metric, over the th350..

12-01-2015, 11:58 AM	#6
Randall Klein Senior Member Join Date: Dec 2002 Location: Lincoln, Nebraska Posts: 785 Likes: 45 Liked 316 Times in 67 Posts	Re: Lightened ring gear, riffle drilled and star flanged axl I do not know how to search past posts, but this was gone over extensively on this site at one time. I believe the concensus was no noticable difference

12-01-2015, 10:35 PM	#9
impstocker Member Join Date: Dec 2008 Location: Wingdale, NY Posts: 302 Likes: 27 Liked 53 Times in 16 Posts	Re: Lightened ring gear, riffle drilled and star flanged axl I use to run a 11 pound aluminum flywheel in my 4000 lb 68 Impala 396/325. All the "experts" told me I needed to run a 30 lb flywheel to get that Chevy moving. Never had a problem with light flywheel. Car never bogged, left pretty hard. The "experts" most of the time were guys who ran Automatics. I also use rifle drilled axles, star flange too, same rear in my 65 Impala now. I felt for the little extra wht not. Just my 2 cents. Will Lamprecht I/SA 65 Impala in progress