|
10-23-2012, 10:58 PM | #21 |
VIP Member
Join Date: Mar 2010
Location: Newport News, VA
Posts: 1,438
Likes: 372
Liked 129 Times in 59 Posts
|
Re: What Race Oil do you trust?
I just started using the Amsoil Dominator Racing 10W30 this weekend after finishing with the break-in oil, Brad-Penn 30W. I've noticed that the oil pressure has increased over the conventional oil, so much that I may have to go to a 5W20 to keep the pressure down. I'll know more after the first change when I can compare each oil.
Lew
__________________
Lew Silverman #2070 "The Wagon Master" N/SA |
10-23-2012, 11:18 PM | #22 |
Member
Join Date: Jul 2007
Location: Georgia
Posts: 154
Likes: 2
Liked 30 Times in 9 Posts
|
Re: What Race Oil do you trust?
This year I've mainly ran Valvoline 10-30 Vr1 conventional oil with great results. I cut apart my filter every 25 runs and saw hardly any material. 190+ runs so far this year changing it every 25 to 30 runs because it loses so much oil due to low ring tension (my fault).
Last year I used Royal Purple XPR 0-10 and it too worked awesome changing it every 50+ runs. 210+ runs last year on the engine and the bearings looked almost perfect. On top of that the Royal purple is a tenth faster in my engine. Both oils are awesome and I recommend them to all* *455 Pontiac Stock Eliminator Engine - The highest RPM it sees is 6100
__________________
Michael Brand II 505B - F/SA |
10-23-2012, 11:31 PM | #23 | |
VIP Member
Join Date: May 2006
Location: Murfreesboro TN
Posts: 4,931
Likes: 1,005
Liked 1,082 Times in 283 Posts
|
Re: What Race Oil do you trust?
Quote:
Insiders with NASCAR teams tell me the Joe Gibbs oil does not get along with some of the various coatings, especially some of the DLC coatings. Having a DLC coating failure is catastrophic. We saw a measurable HP loss with Valvoline 10W-30 race oil, compared to the thickest Joe Gibbs break in oil.
__________________
Alan Roehrich 212A G/S |
|
10-24-2012, 08:43 AM | #24 |
Veteran Member
Join Date: Mar 2005
Location: Sand Springs, OK
Posts: 8,132
Likes: 896
Liked 389 Times in 168 Posts
|
Re: What Race Oil do you trust?
I saw zero advantage to the Gibbs oil, never had bearing problems with anything else anyway. Did not like the sludge in the pan and oil filter, nor the loss of coating on the piston skirts. Some people love it. Had zero issues with RP, and "Race9" is the fastest I've found, so have changed back to RP 5 W 20 & the 009 for heads-ups. With no sludge, no wear, and fastest I have found, I see no reason to change. What is another oil going to do better?
Actually had zero problems with Mobile1 with Comp Cams break in additive added.
__________________
Ed Wright 4156 SS/JA |
10-24-2012, 10:23 AM | #25 |
Senior Member
Join Date: Jul 2007
Location: East China, MI
Posts: 504
Likes: 0
Liked 0 Times in 0 Posts
|
Re: What Race Oil do you trust?
We also use Mobil 1 with the Comp Cams break in additive with no sludge or wear issues.
__________________
Nelson Kowal Stock 345 |
10-24-2012, 11:22 AM | #26 |
Senior Member
Join Date: Jan 2008
Location: 100th Meridian
Posts: 570
Likes: 116
Liked 280 Times in 139 Posts
|
Re: What Race Oil do you trust?
Bob, same here when our friend (rip) ran the JG xp2 he would use it for class then drain it. I had some with 3 runs on it poured it into the motor left a lot of sludge at the bottom of the jug. gsa612
|
10-24-2012, 11:43 AM | #27 |
Veteran Member
Join Date: Mar 2005
Location: Sand Springs, OK
Posts: 8,132
Likes: 896
Liked 389 Times in 168 Posts
|
Re: What Race Oil do you trust?
I've been told that sludge is part of the oil that just "fell out of suspension". Not really sludge. (It is very slippery) And that it "mixes back up when running".
Don't care, don't want it in the bottom of my pan. I still break mine in with BR30, but drain it right after running it. Don't allow it to sit and seperate, if the BR30 even does that. Have not tried to find out if it does.
__________________
Ed Wright 4156 SS/JA Last edited by Ed Wright; 10-24-2012 at 11:46 AM. |
10-24-2012, 12:32 PM | #28 |
Senior Member
Join Date: Nov 2005
Location: Verrry South Jersey
Posts: 530
Likes: 126
Liked 228 Times in 120 Posts
|
Re: What Race Oil do you trust?
|
10-24-2012, 01:52 PM | #29 |
Member
Join Date: Nov 2005
Location: cloquet mn
Posts: 458
Likes: 15
Liked 54 Times in 26 Posts
|
Re: What Race Oil do you trust?
There was a good post on speedtalk a while back about VR1, and a guy on there who
is a independent oil analist/engineer tested 50 top oils for lack of wear #1 ding ding ding Pennzoil Platinum, then amsoil dominator then lucas racing oil!!! Now with real world racing experience i will say there are quite a few oils that perform well for anti wear that are not fast but will keep your stuff alive. As far as fast oils you got Royal purple, Red line Gibbs, Lucas and im sure some others, one thing i tried that was reasonably fast was using 4qts of kendall conventional 5/20 with 16oz of lucas breakin additive. I have used some of the other high ranked anti wear oils with good success for keeping stuff alive but performance suffered considerably, i can say for sure that there is a solid .15 to .20 from best to worst.
__________________
Ron Mattson 5015 STK |
10-24-2012, 01:53 PM | #30 |
Senior Member
Join Date: Jul 2007
Posts: 578
Likes: 0
Liked 3 Times in 1 Post
|
Re: What Race Oil do you trust?
I had the same, grey sludge with the RP 5w20, both the reg and XPR, didnt matter. It never would "mix" back in. When we first built the car and were hammering on the engine, we had it out often and found the same thing everytime. I would clean in out completely and find it again the next time.
Good discussion guys, what have some of the rest of you found? I know the Gibbs is common in SS, any lifter pump up issues with the thinner weights in Stock? Wade |
|
|