|
![]() |
#11 |
VIP Member
Join Date: Oct 2002
Location: On a hilltop in Pa.
Posts: 4,301
Likes: 3,235
Liked 7,033 Times in 1,584 Posts
|
![]()
Richie, add 1/2 qt. of fluid!
__________________
Billy Nees 1188 STK, SS What is "NORMAL"??? |
![]() |
![]() |
Liked |
![]() |
#12 |
VIP Member
Join Date: Jan 2003
Location: Allentown,PA
Posts: 2,442
Likes: 795
Liked 719 Times in 210 Posts
|
![]()
The lag is somewhat inherent in some valve bodies but many times its due to improper fluid level .
Here's the link to the Turbo Action tech tip on proper dip stick measurement. https://www.turboaction.com/TH200Full_Mark1-04.pdf
__________________
Tom Goldman 1500 SG , 1506 STK |
![]() |
![]() |
Liked |
![]() |
#13 |
VIP Member
Join Date: Jun 2007
Location: Northern New Jersey suburbs
Posts: 2,285
Likes: 25
Liked 515 Times in 203 Posts
|
![]()
I’ve been working on the car all day
Ran it for a few minutes and checked the level and it was low It has a custom locking dipstick and someone marked it on one side for correct level Without pulling the pan I can’t confirm that dipstick is correct I’ll recheck it hot at the track next week. Car needs some TLC and we’re getting reacquainted.
__________________
Rich Biebel S/C 1479 Stock 147R Last edited by Rich Biebel; Yesterday at 05:34 PM. |
![]() |
![]() |
Liked |
![]() |
#14 |
VIP Member
Join Date: Jun 2007
Location: Northern New Jersey suburbs
Posts: 2,285
Likes: 25
Liked 515 Times in 203 Posts
|
![]()
No cooler and No loop.....plugged at the trans.....Don't know if that could be an issue....
__________________
Rich Biebel S/C 1479 Stock 147R |
![]() |
![]() |
![]() |
#15 |
VIP Member
Join Date: Dec 2001
Location: Texarkana Ark/TX
Posts: 2,370
Likes: 472
Liked 696 Times in 271 Posts
|
![]()
Rich,
I don't know about a 200 but in a PG if you just plug the cooler lines off with out modifying the pump it causes a restriction in fluid flow out of the converter. Converter will function different with the restricted flow. Just Put a loop on it and see if it helps the issue.
__________________
Adger Smith (Former SS) |
![]() |
![]() |
![]() |
#16 | |
Member
Join Date: Oct 2020
Posts: 256
Likes: 3,457
Liked 497 Times in 168 Posts
|
![]() Quote:
Rich I think you might want to contact the transmission's builder. None of us know who's front pump is in there, and what's been done internally. My McClay 200 is plugged. I believe Leon plugs his cooler inlet and outlet as well. If I remember correctly the Remac front pumps are made to have the cooler lines plugged. But there are other builders out there and some have a different way of getting the same things done. This is where you might want to get in touch with the original builder. If you haven't reached out to Mark Yac. now might be a good time. I'm not personally well versed on all the internal workings of those units to let you know exactly "what " to be looking for. Have a good day. Respectfully, Henry Kunz 1534 H/SA P.S. Rich have you put a pressure gauge on the trans and run it in gear, even on jack stands ? Last edited by Henrys Toy; Today at 06:10 AM. |
|
![]() |
![]() |
Liked |
![]() |
|
|