|
![]() |
#1 |
Junior Member
Join Date: Oct 2015
Posts: 14
Likes: 2
Liked 9 Times in 4 Posts
|
![]()
WTB single head or pair of W2 heads.
Please, read carefully what I need; * heads for 59 degree block * flat rocker mounts and oiling thru oil channel (version for Jesels oiling thru pushods is not suitable for my engine). * version with large exhaust bolt pattern * prefer later version with support ribs round lower head bolts * both closed and open chamber are doable for my engine Overseas buyer with Paypal and shipping address in USA. Please offer heads with no cracks and non or just little ported. Most optimum heads are bare. Running currently fresh 3870810 heads, but too bad the other head is cracked. PM to start. Thanks! PS. No cheating, please. My wallet and *** have been already hurted enough. Last edited by PPRCuda; 07-19-2024 at 02:22 AM. |
![]() |
![]() |
![]() |
#2 |
VIP Member
Join Date: Apr 2003
Location: Tulsa, Oklahoma
Posts: 1,598
Likes: 3,429
Liked 700 Times in 301 Posts
|
![]()
If you have not done so already you might try posting on Moparts.org.
If you know some of the acceptable part numbers (not casting numbers) that could help also. Good luck! |
![]() |
![]() |
![]() |
#3 | |
Junior Member
Join Date: Oct 2015
Posts: 14
Likes: 2
Liked 9 Times in 4 Posts
|
![]() Quote:
Most wanted head is #3870810 with large exhaust pattern and flat rocker stands. Last edited by PPRCuda; 07-22-2024 at 03:18 PM. |
|
![]() |
![]() |
Liked |
![]() |
|
|