Brake Pressure Switch for launch control ???

[GTX JOHN]

Set @ 800 and release @ 200 generally on our stuff.
120/125 MPH Stockers.

[Willyracer]

Originally Posted by dean ribeiro

I have a new stocker that has a brake pressure switch for launch control and I am trying to understand how it works and how to set it properly? I am just an old 2 step switch kind of guy (and am easily confused).

Any help is greatly appreciated!

Text or call six03-78five-seven866
email: deanribeiro@comcast.net

The pressure switch is adjusted to close a set of electrical tips . When the brake pressure is reached voltage is pass to the 2 step device . Usually
There is toggle switch to select between 2 step and 3 step for the water burn out

[SDT1DYI]

PSW-190. Viton .

[Eman]

Originally Posted by dean ribeiro

I have a new stocker that has a brake pressure switch for launch control and I am trying to understand how it works and how to set it properly? I am just an old 2 step switch kind of guy (and am easily confused).

Any help is greatly appreciated!

Text or call six03-78five-seven866
email: deanribeiro@comcast.net

Does the car have a 2 step or a 3 step? No matter the brake pressure switch should send power to the rev control when you reach the pressure setting of the switch. Power to the switch could possibly be controlled by a high gear switch on the shifter or in the transmission so the pressure switch loses power in high gear and cannot activate the 2 step if you brake driving the stripe. If the switch is adjustable you just need to set it for the brake pressure you stage with. I wired mine with a small LED so I know when power is going to the rev control as I don't have a brake pressure gauge.