Fast xfi 2.0 O2 sensor setup

Mike Graham · 05-19-2024, 06:10 PM

Anyone with any experience with the Fast xfi 2.0? The oxygen sensor always reads 15.94 on the gauge panel and the monitor. I have replaced the sensor and checked the harness for damage. I don't see any calibration procedure in the manual. Any help would be appreciated.

countrypuppy4865 · 05-19-2024, 10:44 PM

If the sensor is in the collector it will show 15.94 much if not all the time the engine isn’t under a load.

StockerStang912 · 05-20-2024, 06:15 PM

Hi Mike - make sure you select the right sensor type in System Configuration. There's 2 options to choose from (L1H1 and LHA) and will provide a different reading if the incorrect version is selected.

05-19-2024, 06:10 PM	#1
Mike Graham Member Join Date: Jul 2002 Posts: 389 Likes: 1 Liked 299 Times in 56 Posts	Fast xfi 2.0 O2 sensor setup Anyone with any experience with the Fast xfi 2.0? The oxygen sensor always reads 15.94 on the gauge panel and the monitor. I have replaced the sensor and checked the harness for damage. I don't see any calibration procedure in the manual. Any help would be appreciated.

05-19-2024, 10:44 PM	#2
countrypuppy4865 Senior Member Join Date: Nov 2003 Location: Donaldsonville, LA Posts: 969 Likes: 8 Liked 184 Times in 63 Posts	Re: Fast xfi 2.0 O2 sensor setup If the sensor is in the collector it will show 15.94 much if not all the time the engine isn’t under a load. __________________ Jimmy "Cooter" Hidalgo, Jr. 4865 E/SA '04 GTO 4865 SS/GA '99 Firebird

05-20-2024, 06:15 PM	#3
StockerStang912 Junior Member Join Date: May 2015 Location: Minneapolis, MN Posts: 12 Likes: 1 Liked 11 Times in 3 Posts	Re: Fast xfi 2.0 O2 sensor setup Hi Mike - make sure you select the right sensor type in System Configuration. There's 2 options to choose from (L1H1 and LHA) and will provide a different reading if the incorrect version is selected. __________________ Greg Viscome 193 GT/QA