|
04-20-2021, 08:49 PM | #1 |
Junior Member
Join Date: Aug 2013
Location: Chatham, ON. Canada
Posts: 19
Likes: 15
Liked 15 Times in 9 Posts
|
LT1 PCV Advice
I just built a stock eliminator LT1 fuel injected motor and have made several runs on the dyno. I hooked up the stock PCV system (hose on passenger side valve cover to TB and then PCV valve to intake below TB). Today I pulled the throttle body off because I was curious and sure enough the intake was coated with oil.
Should I just go ahead and delete the PCV? Or is it worth it to try and either baffle the oil separator under the intake or try another way to eliminate oil entering the intake? Appreciate any help!
__________________
Pierce Jones 1995 Camaro D/S #3102 |
Liked |
|
|