Stock eliminator Lifters - Page 2

carlm · 12-17-2021, 09:19 PM

Hey Larry, how ya been??
Can you thro them in the ultra sonic taken apart or will it hurt the puck bonding,, mice got into the valley of my bagged motor.. cleaning everything was brand new assembly but had been sitting.going to put in tool steel trends though.
Carl
C/sa 3054..retired

carlm · 12-17-2021, 09:25 PM

Retired but still workin.

Jim Parsons · 12-19-2021, 07:31 PM

This is a little off the subject but Camshaft buyers beware! I recently purchased a steel camshaft form one of the major cam suppliers for my stocker and was told by the owner there would be no problem on delivery as we have plenty of “new” cores. When it arrived in a couple of weeks I tried fitting it in a couple of blocks and determined it hadn’t been finished machined on length, too long! When talking to them about this issue and its return I also noticed it had two serial numbers stamped on it. A little closer inspection I realized they had sent me a regrind! I then stated I wanted a “new” cam liked I had paid for and not the regrind. Upon receiving it back they agreed that yes the second serial number indicated it had “originally been ground as a roller” and they would supply me a “new” cam to my specs. In a few days I received another call saying the owner had changed his mind and I should take the original one they supplied which had been corrected on length. I declined and asked for a refund which they agreed to.

Jim Parsons

RonB · 12-23-2021, 01:23 PM

Trend is backlogged and cannot ship lifters until April. So, anyone have any experience with Howard Cams tool steel lifters?

Thanks / Ron B.

12-17-2021, 09:19 PM	#1
carlm Junior Member Join Date: Jan 2005 Posts: 10 Likes: 3 Liked 3 Times in 1 Post	Re: Stock eliminator Lifters Hey Larry, how ya been?? Can you thro them in the ultra sonic taken apart or will it hurt the puck bonding,, mice got into the valley of my bagged motor.. cleaning everything was brand new assembly but had been sitting.going to put in tool steel trends though. Carl C/sa 3054..retired

12-17-2021, 09:25 PM	#2
carlm Junior Member Join Date: Jan 2005 Posts: 10 Likes: 3 Liked 3 Times in 1 Post	Re: Stock eliminator Lifters Retired but still workin. Last edited by carlm; 12-17-2021 at 09:28 PM.

12-19-2021, 07:31 PM	#3
Jim Parsons Member Join Date: Feb 2002 Location: Kearney Mo Posts: 200 Likes: 434 Liked 197 Times in 32 Posts	Re: Stock eliminator Lifters This is a little off the subject but Camshaft buyers beware! I recently purchased a steel camshaft form one of the major cam suppliers for my stocker and was told by the owner there would be no problem on delivery as we have plenty of “new” cores. When it arrived in a couple of weeks I tried fitting it in a couple of blocks and determined it hadn’t been finished machined on length, too long! When talking to them about this issue and its return I also noticed it had two serial numbers stamped on it. A little closer inspection I realized they had sent me a regrind! I then stated I wanted a “new” cam liked I had paid for and not the regrind. Upon receiving it back they agreed that yes the second serial number indicated it had “originally been ground as a roller” and they would supply me a “new” cam to my specs. In a few days I received another call saying the owner had changed his mind and I should take the original one they supplied which had been corrected on length. I declined and asked for a refund which they agreed to. Jim Parsons

12-23-2021, 01:23 PM	#4
RonB Junior Member Join Date: Jun 2021 Posts: 31 Likes: 23 Liked 50 Times in 15 Posts	Re: Stock eliminator Lifters Trend is backlogged and cannot ship lifters until April. So, anyone have any experience with Howard Cams tool steel lifters? Thanks / Ron B.