Chevy Al 1 1/16" bore - Page 2

Eman · 12-18-2018, 03:13 PM

https://www.dragstuff.com/techarticl...sterCylPN.html
Here's a list of sizes and part #'s for Mopar style aluminum MC's.
No matter what MC you use be sure you have a way to retain the pushrod so it cannot drop out of the rear of the MC. A good top pedal stop and a guide for the rod is important. Last year a racer at a local track in a car that was bullt and raced for years had an incident. His foot caught under the brake pedal and he pulled up hard enough to get the rod to drop out. He went off roading and was lucky.

Ed McLawhorn Jr. · 12-17-2018, 11:48 PM

Quote:

Originally Posted by Dave1695

Ed, is this a drag race car and is the MC mounted in stock location?

Yes, this is a full drag car and yes the MC is mounted in the stock location.

12-18-2018, 03:13 PM	#1
Eman Member Join Date: May 2014 Location: E TN Posts: 473 Likes: 16 Liked 133 Times in 76 Posts	Re: Chevy Al 1 1/16" bore https://www.dragstuff.com/techarticl...sterCylPN.html Here's a list of sizes and part #'s for Mopar style aluminum MC's. No matter what MC you use be sure you have a way to retain the pushrod so it cannot drop out of the rear of the MC. A good top pedal stop and a guide for the rod is important. Last year a racer at a local track in a car that was bullt and raced for years had an incident. His foot caught under the brake pedal and he pulled up hard enough to get the rod to drop out. He went off roading and was lucky.