|
06-27-2018, 09:30 PM | #1 |
VIP Member
Join Date: Oct 2008
Posts: 2,116
Likes: 1,078
Liked 181 Times in 111 Posts
|
More Pure Stock Update
Got the new MT front Runners and Slicks today.
Slicks are 28 inches like before. Wondering what the 29.5 inch would do? Have a bit more HP. Going to try and get the front wheel bearings treated with one of those Metal Polish and Surface treatments. Though everyone and their brother is beating me to get a T200 trans. Going to stay with the 4L60E for now until it is used up. Got the PerformaBuilt Level 2 which is good for 800hp. Will add 4.88s later and Lock Up the Converter. See what performance that gives me. Dan |
06-29-2018, 12:46 PM | #2 |
Member
Join Date: Jan 2008
Posts: 352
Likes: 18
Liked 19 Times in 12 Posts
|
Re: More Pure Stock Update
Might sound crazy but my buddy uses off the shelf Autozone wheel bearings. He focuses on torque settings and grease type. They spin like crazy. It’s a Foxbody Mustang that he ran in NMRA Factory Stock.
__________________
Mitch Beri- The Motor City 1985 GT- “Stock-ish” 5.0 motor, AOD/ trans brake. 12.68 @ 101.31mph. https://www.facebook.com/groups/FOXBODYFLEAMARKET/ |
07-02-2018, 03:13 PM | #3 | |
VIP Member
Join Date: Oct 2008
Posts: 2,116
Likes: 1,078
Liked 181 Times in 111 Posts
|
Re: More Pure Stock Update
Quote:
Some racers have picked up a full tenth with the micro polished and chemical lubricant surface treatment. More when a transmission and rear end bearings are done. |
|
07-03-2018, 11:16 PM | #4 |
Member
Join Date: Jan 2008
Posts: 352
Likes: 18
Liked 19 Times in 12 Posts
|
Re: More Pure Stock Update
Cool. Whats the cost on wheel bearings?
__________________
Mitch Beri- The Motor City 1985 GT- “Stock-ish” 5.0 motor, AOD/ trans brake. 12.68 @ 101.31mph. https://www.facebook.com/groups/FOXBODYFLEAMARKET/ |
07-03-2018, 11:18 PM | #5 |
Member
Join Date: Jan 2008
Posts: 352
Likes: 18
Liked 19 Times in 12 Posts
|
Re: More Pure Stock Update
What front/ rear brake setup are you running?
__________________
Mitch Beri- The Motor City 1985 GT- “Stock-ish” 5.0 motor, AOD/ trans brake. 12.68 @ 101.31mph. https://www.facebook.com/groups/FOXBODYFLEAMARKET/ |
07-04-2018, 01:33 AM | #6 |
VIP Member
Join Date: Oct 2008
Posts: 2,116
Likes: 1,078
Liked 181 Times in 111 Posts
|
Re: More Pure Stock Update
|
07-04-2018, 08:18 AM | #7 |
Member
Join Date: Jan 2008
Posts: 352
Likes: 18
Liked 19 Times in 12 Posts
|
Re: More Pure Stock Update
Also, He paid a lot of attention to his stock front brake setup and i believe he honed out the piston sleeve to allow it to slide freely in the bore.
__________________
Mitch Beri- The Motor City 1985 GT- “Stock-ish” 5.0 motor, AOD/ trans brake. 12.68 @ 101.31mph. https://www.facebook.com/groups/FOXBODYFLEAMARKET/ |
07-06-2018, 12:38 PM | #8 | |
VIP Member
Join Date: Oct 2008
Posts: 2,116
Likes: 1,078
Liked 181 Times in 111 Posts
|
Re: More Pure Stock Update
Quote:
There should be some improvement lessening Brake Drag. Did add a new brake cable to stop the Parking Brake from dragging. Just went over the wheel and reconditioned them. The Washers were deformed and caused the studs to break last year. D |
|
07-07-2018, 11:55 PM | #9 | |
Member
Join Date: Jan 2008
Posts: 352
Likes: 18
Liked 19 Times in 12 Posts
|
Re: More Pure Stock Update
Quote:
__________________
Mitch Beri- The Motor City 1985 GT- “Stock-ish” 5.0 motor, AOD/ trans brake. 12.68 @ 101.31mph. https://www.facebook.com/groups/FOXBODYFLEAMARKET/ |
|
07-10-2018, 12:03 PM | #10 |
VIP Member
Join Date: Oct 2008
Posts: 2,116
Likes: 1,078
Liked 181 Times in 111 Posts
|
Re: More Pure Stock Update
|
|
|