|
04-20-2014, 12:58 AM | #1 |
Junior Member
Join Date: Sep 2012
Posts: 1
Likes: 0
Liked 0 Times in 0 Posts
|
Cross member 4sp Jerico in 67 Camaro??
Hey guy's...question for you blokes running Stockers with a 4sp Jerico in a 1st gen Camaro...I've got a 67 Camaro and I'm fitting a DR4-4 Jerico...I've purchased the factory 4 speed cross member from Classic Industries but with a factory rubber GM trans mount it sits the transmission way to high in the tunnel...what do you guy's use for a cross member and trans mount when running a Jerico or is a custom cross member the only option??
Thanks in advance, Ross. |
04-20-2014, 01:14 AM | #2 |
Member
Join Date: Jan 2010
Posts: 190
Likes: 85
Liked 109 Times in 32 Posts
|
Re: Cross member 4sp Jerico in 67 Camaro??
My 67 camaro with a Jerico trans. has a custom crossmember. Not sure how much different it is as far as height from a stock crossmember. Never had a stock one in the car.
|
04-20-2014, 05:31 AM | #3 |
VIP Member
Join Date: Jan 2002
Location: Central Massachusetts
Posts: 1,391
Likes: 655
Liked 396 Times in 87 Posts
|
Re: Cross member 4sp Jerico in 67 Camaro??
Had to cut & re-weld the "saddle" or "mount" on the cross member in my Chevelle in order to lower the angle of the transmission to the rear end.
|
04-20-2014, 10:46 PM | #4 |
Senior Member
Join Date: Sep 2007
Location: Henderson, NV
Posts: 578
Likes: 7
Liked 47 Times in 25 Posts
|
Re: Cross member 4sp Jerico in 67 Camaro??
The Jerico DR4 was a bolt-in for my 66 A body, except that I trimmed down a couple ribs on the top cover for more clearance to the hump.
|
|
|