Latest Jerico version

4spdJohnny · 01-25-2024, 06:15 PM

Anyone out there have any real world experience with Jerico's latest revision of their drag race 4 speed in stocker type application...?

Adam Strang · 01-25-2024, 06:25 PM

John,are talking about the dr4-4 ? That's what I've been running for a while now. It's been at least 12 to 15 years and in that time I've broken one headset and twisted one input shaft.

Bob Gullett · 01-25-2024, 06:33 PM

My DR4-4 revision is at least 14 years old. Only thing I've broke in at least 6-700 runs is one dog ring and the 3-4 shifter finger.

bdp · 01-25-2024, 08:27 PM

Give ma a call John I have one of the billet ones
Brian Pott

Keith Bennett · 01-25-2024, 10:05 PM

I have the DR-5 version that I bought around 2010 and a 2nd one a couple of years later.
I did hurt an input shaft, I feel I have always ran to much clutch, which hurts parts.
I use it now as my back-up to my G-Force G101.

4spdJohnny · 01-26-2024, 12:22 AM

Thanks every one for the replies. I have a DR4-4 in my car with over 400 runs since last apart. I was referring to Jerico's latest drag race 4 speed that I believe they call their dr4-4.2. What Brian was saying their "billet" piece. It has a center support like a G-force. I understand that nothing really interchanges with the DR4-4.

01-25-2024, 06:15 PM	#1
4spdJohnny Member Join Date: Aug 2010 Location: Grand Forks ND Posts: 240 Likes: 472 Liked 128 Times in 43 Posts	Latest Jerico version Anyone out there have any real world experience with Jerico's latest revision of their drag race 4 speed in stocker type application...? __________________ John A. McLaughlin 5757 B/S 440-6 or G/S 383 70 Road Runner, Dad's 5096 K/SA 70 Two Ton Tamater, Taylor's,Alec,Breezy

01-25-2024, 06:25 PM	#2
Adam Strang Member Join Date: Dec 2001 Location: Jericho,Vt Posts: 206 Likes: 91 Liked 93 Times in 22 Posts	Re: Latest Jerico version John,are talking about the dr4-4 ? That's what I've been running for a while now. It's been at least 12 to 15 years and in that time I've broken one headset and twisted one input shaft. __________________ Adam Strang 1018 STK

01-25-2024, 06:33 PM	#3
Bob Gullett VIP Member Join Date: Mar 2002 Posts: 1,080 Likes: 43 Liked 430 Times in 97 Posts	Re: Latest Jerico version My DR4-4 revision is at least 14 years old. Only thing I've broke in at least 6-700 runs is one dog ring and the 3-4 shifter finger. __________________ 68 Chevy11 327 F/S

01-25-2024, 08:27 PM	#4
bdp Junior Member Join Date: May 2010 Posts: 4 Likes: 2 Liked 3 Times in 3 Posts	Re: Latest Jerico version Give ma a call John I have one of the billet ones Brian Pott

01-25-2024, 10:05 PM	#5
Keith Bennett Member Join Date: Dec 2006 Location: Lakeland FL Posts: 198 Likes: 454 Liked 70 Times in 36 Posts	Re: Latest Jerico version I have the DR-5 version that I bought around 2010 and a 2nd one a couple of years later. I did hurt an input shaft, I feel I have always ran to much clutch, which hurts parts. I use it now as my back-up to my G-Force G101. __________________ Keith A/S 2990/Terri A/SA 2991 "Imagine what you'd attempt, if you knew you could not fail!"

01-26-2024, 12:22 AM	#6
4spdJohnny Member Join Date: Aug 2010 Location: Grand Forks ND Posts: 240 Likes: 472 Liked 128 Times in 43 Posts	Re: Latest Jerico version Thanks every one for the replies. I have a DR4-4 in my car with over 400 runs since last apart. I was referring to Jerico's latest drag race 4 speed that I believe they call their dr4-4.2. What Brian was saying their "billet" piece. It has a center support like a G-force. I understand that nothing really interchanges with the DR4-4. __________________ John A. McLaughlin 5757 B/S 440-6 or G/S 383 70 Road Runner, Dad's 5096 K/SA 70 Two Ton Tamater, Taylor's,Alec,Breezy

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode