|
|
12-19-2016, 02:06 PM
|
#1 |
|
Member
Join Date: Jun 2010
Location: VA
Posts: 230
Likes: 23
Liked 21 Times in 13 Posts
|
Brake system stuff
Need advice on planning the brake system on a e-body stocker. I have strange discs front and back. Planning on using a 2 step with an adjustable pressure switch. Question are is a line loc and adjustable proportioning valve a must ? And does the pressure switch go on the front or rear circuit ?
__________________
Brian Carpenter Stock 1358 |
|
|
|
12-19-2016, 06:57 PM
|
#2 |
|
Live Reporter
Join Date: Oct 2004
Location: Hickory, Ky
Posts: 10,613
Likes: 1,896
Liked 10,651 Times in 2,210 Posts
|
Re: Brake system stuff
Pressure switch is on the front on mine without a p valve. Hope this helps.
|
|
|
|
|
12-20-2016, 10:01 AM
|
#3 |
|
Member
Join Date: Jun 2010
Location: VA
Posts: 230
Likes: 23
Liked 21 Times in 13 Posts
|
Re: Brake system stuff
Thanks Larry. Ok, no stock Prop valve, just a distribution block.
__________________
Brian Carpenter Stock 1358 |
|
|
|
|
12-20-2016, 12:39 PM
|
#4 |
|
Member
Join Date: Dec 2005
Posts: 252
Likes: 297
Liked 132 Times in 27 Posts
|
Re: Brake system stuff
Same as Larry's with pressure switch between master cylinder and line lock.
|
|
|
|
|
12-20-2016, 12:51 PM
|
#5 |
|
Senior Member
Join Date: Jul 2014
Posts: 569
Likes: 36
Liked 53 Times in 38 Posts
|
Re: Brake system stuff
Brian, what pressure switch are you talking about? Mike
Last edited by Coleydog; 12-20-2016 at 06:01 PM. |
|
|
|
|
12-20-2016, 02:57 PM
|
#6 |
|
Member
Join Date: Jun 2010
Location: VA
Posts: 230
Likes: 23
Liked 21 Times in 13 Posts
|
Re: Brake system stuff
Mike Delahanty had posted a link in an earlier thread, I have it bookmarked on another computer.
__________________
Brian Carpenter Stock 1358 |
|
|
|
|
12-21-2016, 12:11 PM
|
#7 |
|
Member
Join Date: May 2014
Location: E TN
Posts: 467
Likes: 16
Liked 133 Times in 76 Posts
|
Re: Brake system stuff
I use a Hurst Line Lock and my pressure switch screws right into an extra port on the LL.
|
|
|
|
|
12-22-2016, 11:19 AM
|
#8 |
|
Member
Join Date: Jun 2010
Location: VA
Posts: 230
Likes: 23
Liked 21 Times in 13 Posts
|
Re: Brake system stuff
Eman, sounds simple enough. I think I'll do that. Not really decided on an adjustable prop. valve. If I have no valve, I should have 50/50 brake bias. If that doesn't work well enough, I can always add one to put more bias on the rear wheels.
__________________
Brian Carpenter Stock 1358 |
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
