|
|
|
|
12-15-2015, 05:28 PM
|
#1 |
|
Junior Member
Join Date: Aug 2014
Location: finland
Posts: 45
Likes: 10
Liked 4 Times in 3 Posts
|
mopar thermoguad main jet kit
Hi.any tips where I can bye mopar carter thermoguad carburetor main jet kit and gasket kit.thanks. Antti/ finland
|
|
|
|
12-16-2015, 12:50 PM
|
#2 |
|
VIP Member
Join Date: Nov 2001
Location: Florida
Posts: 1,542
Likes: 34
Liked 138 Times in 51 Posts
|
Re: mopar thermoguad main jet kit
You can get basic rebuild kits at most parts stores (I forgot the brand name), but I found this site to have a lot of good stuff.
http://quadrajetparts.com/carter-the...c-299_158.html Carter Strip Kits have been out of production for a very long time and very hard to find. They had them for a variety of their carbs, including the TQ.
__________________
LOCOMOTION Racing |
|
|
|
|
12-16-2015, 07:10 PM
|
#3 |
|
Senior Member
Join Date: Dec 2008
Location: Berthoud, Coloraduh
Posts: 695
Likes: 13
Liked 8 Times in 7 Posts
|
Re: mopar thermoguad main jet kit
__________________
without losers,winning means nothing. |
|
|
|
|
12-16-2015, 07:34 PM
|
#4 |
|
Veteran Member
Join Date: Jan 2002
Location: Central Florida
Posts: 5,844
Likes: 666
Liked 683 Times in 129 Posts
  |
Re: mopar thermoguad main jet kit
The Carter Strip Kits have been out of production for over 30 years and are very hard to find. Your best bet is Ebay or Amazon or places such as this. I have run into them at garage sales and MoPar dealers with new/old stock. BTW they are very pricey! Good luck! Jim
.
__________________
Jim Wahl....NHRA #2239 S/SS - IHRA # 8 Stock, D2 Stock Champion (forever I guess) 2019 Baby Gators Stock Champion 2009 NHRA D2 National Open Stock Champion 1982 NHRA D2 West Palm Beach LDRS SS Runner Up Past President, Southern Stock / Super Stock Association. 
Last edited by Jim Wahl; 12-17-2015 at 09:10 PM. |
|
|
|
|
12-16-2015, 10:29 PM
|
#5 | |
|
Member
Join Date: Feb 2008
Location: Black Creek, BC Canada
Posts: 331
Likes: 79
Liked 172 Times in 81 Posts
|
Re: mopar thermoguad main jet kit
Quote:
I was looking for jets for a Carter BBD, these guys were very helpful Jim Mantle V/SA 6632 |
|
|
|
|
|
12-17-2015, 10:26 AM
|
#6 |
|
Member
Join Date: Aug 2004
Location: sunny,az
Posts: 165
Likes: 0
Liked 0 Times in 0 Posts
|
Re: mopar thermoguad main jet kit
Just ditch the primary jet system. Eliminate the metering rods altogether and the step up piston. You can purchase a holley jet tap and retap the primary holes for a holley jet. I then find the smallest secondary jet (the long ones) in economy 750's and drill them to desired sizes. Then all you need is a parts store rebuild kit.
|
|
|
|
|
12-17-2015, 05:22 PM
|
#7 |
|
Senior Member
Join Date: Oct 2003
Location: West Seneca
Posts: 537
Likes: 59
Liked 28 Times in 11 Posts
|
Re: mopar thermoguad main jet kit
Sorensen. makes the rebuild kits they are a spin off of Hy grade or Standard.
Main jets all over E-bay however I found a great company called BFIC or www.carbsonly.com His name is Carlos he has tons of parts for Thermoquads. Hope this helps Mike
__________________
EX 5-Doorstocker |
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
