|
|
|
|
02-08-2025, 04:42 PM
|
#1 | |
|
Veteran Member
Join Date: May 2006
Location: Murfreesboro TN
Posts: 5,095
Likes: 1,541
Liked 1,770 Times in 402 Posts
|
Re: 2002 Buick 3800
Quote:
Yep. Took me a couple of hours on my Firebird. You'll have to bleed the cooling system.
__________________
Alan Roehrich 212A G/S |
|
|
|
| Liked |
|
02-08-2025, 05:32 PM
|
#2 |
|
Senior Member
Join Date: May 2007
Location: DRAGSTRIP
Posts: 881
Likes: 855
Liked 614 Times in 179 Posts
|
Re: 2002 Buick 3800
Do what Alan said and make sure you check those 2 coolant elbows the GM ones are plastic and leak all the time!
24503423 elbow 12565082 elbow gm numbers Dorman makes metal ones also for replacement. Also waterpumps are bad on those and it all looks like its leaking from the same area.
__________________
5664 GHI/SA 1985 CAMARO RED H/SA 1985 CAMARO BLUE I/SA Last edited by TOSTO RACING; 02-08-2025 at 05:35 PM. |
|
|
|
|
02-08-2025, 07:32 PM
|
#3 |
|
Member
Join Date: May 2014
Location: Wilmington NC
Posts: 111
Likes: 151
Liked 74 Times in 24 Posts
|
Re: 2002 Buick 3800
Check the coolant elbows as stated above. That's what happened to my moms car recently. Not a difficult fix, but still a pain in the arse.
__________________
William Kilduff 1970 Barracuda (still under construction, indefinitely) 1968 Camaro SS/C |
|
|
|
|
02-09-2025, 02:23 PM
|
#4 | |
|
Senior Member
Join Date: May 2020
Posts: 508
Likes: 534
Liked 490 Times in 239 Posts
|
Re: 2002 Buick 3800
Quote:
Seems like you have to take half the car apart to work on these things! |
|
|
|
|
|
02-09-2025, 05:08 PM
|
#5 |
|
Junior Member
Join Date: Aug 2011
Location: Buffalo New York
Posts: 79
Likes: 9
Liked 48 Times in 10 Posts
|
Re: 2002 Buick 3800
I would go-ahead and replace the plastic upper intake all together. They will warp over time, and then you put a fresh gasket underneath and it will still leak. Dorman makes a replacement.
|
|
|
|
|
02-15-2025, 11:24 PM
|
#6 |
|
Junior Member
Join Date: Sep 2011
Posts: 51
Likes: 0
Liked 10 Times in 6 Posts
|
Re: 2002 Buick 3800
The Dorman intake used to come with a different internal EGR tube to get the heat away from the intake. OE configuration would damage the intake, sometimes leak internal and hydraulic the engine. Would suggest doing the lower intake at the same time, the general used plastic lower intake gaskets also replacements can be gotten in metal with rubber inserts.
|
|
|
|
| Liked |
|
02-09-2025, 02:21 PM
|
#7 | |
|
Senior Member
Join Date: May 2020
Posts: 508
Likes: 534
Liked 490 Times in 239 Posts
|
Re: 2002 Buick 3800
Quote:
Pump and elbows already replaced a while back... |
|
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
