Bullet roller lifters for SS

[L Peterson6261]

I just purchased a used Super Stock 305 engine to put in my SS car (SS/KA) with Bullet roller lifters. What do you guys think of the Bullet lifters?

[1320racer]

They're Morel lifters and they wouldn't be in anyone of my engines.

Most Professional Sportsman engine builders agree that BAM are the best tie bar roller lifter which is what is in my engines. I've also used Isky EZX without issue.

That said, if you're not going to swap them out, at least check them.

[nickh]

Ed is correct they are private labeled to bullet. We ran ISKY lifters in our 705 TS motor. We also ran ISKY in our dirt track motors, never had any issue.

[L Peterson6261]

Originally Posted by 1320racer

They're Morel lifters and they wouldn't be in anyone of my engines.

Most Professional Sportsman engine builders agree that BAM are the best tie bar roller lifter which is what is in my engines. I've also used Isky EZX without issue.

That said, if you're not going to swap them out, at least check them.

Thanks for the input, greatly appreciated! ... Where to get them and do you have a part number to be sure I get the right ones?

[1320racer]

https://bamlifters.com/pages/small-b...roller-lifters


Local Dealer to you

Hutchins Performance (Dan Hutchins)
5740 SW 56th Ave
Portland OR 97221
Ph: (503) 246-7144
Email: hutchinsperformance@comcast.net

[mnmaxwedge]

BAM lifters is Bruce Miller, who used to make the Crane roller lifters back when the Cranes were good.

[1320racer]

BAM is Brad Miller