65 Mopar B Body springs

[Steve Stasko]

Originally Posted by garyc

the super stock springs are shorter you will have to change front hangers,
you can use super stock springs using your main leaf, common upgrade

Can you even buy SS springs from Mopar anymore? Probably NS1 like everything else in the parts catalog. The quality went downhill anyways when they moved production of them from Canada to Mexico.

That being said, the original 002/003 springs will require a 2" longer front hanger due to the shorter segment. I had a pair of those on a '65 Coronet. Without the longer front hanger, I could still safely run a 28x10.5 MT on the car without rubbing. To get the proper geometry, you have to make a new hanger hole in the frame rail ahead of the original to correct rear hanger location. It was a bracket car, but a simple way to alter the wheelbase a bit.

Mopar did sell an S/S spring for heavier cars that did not require the longer hangers. My personal opinion...Buy the Launchers.

[mopacltd]

I just acquired an NOS set of 456 and 457 springs for my '64 Sport Fury. Will I need to replace the front hanger?

[Steve Stasko]

Originally Posted by mopacltd

I just acquired an NOS set of 456 and 457 springs for my '64 Sport Fury. Will I need to replace the front hanger?

You shouldn't. That is the '64/65 Hemi B-body spring.

[Frank Castros]

I had those springs on my car back in the day and they worked great.

[garyc]

I just ordered a set. Of s/s springs from my local dealer 3800lb

[GTX JOHN]

Suggest you shim pinion angle down approximately 4 Degrees
with those springs. Be sure rear shackles are leaning toward rear
bumper and not forward.

[daroncogar]

Thanks to all.. could someone give me Greg’s number with Tri City please.?

[Race Clean]

17606309094
You wont be sorry whatever you try to do in this area of motorsports

[mopacltd]

Thanks for the info, guys.