Wheel bearing grease

[Race Clean]

When visiting Lambs shop several years ago I told him you are using the the same grease we use on our commercial jets and he quickly responded that's because that grease is designed to go from a stand still to 150mph in a second
Never really thought about it that way before he said it!
Dont know if that is the same they use today.

[MR DERBY CITY]

It’s always a GOOD DAY when talking to Betty Lamb on the phone. One winter during our conversation I told her it was 20 degrees here at home....She asked me WHY on earth would you live there ? Honestly, I didn’t know what to say....I do use and recommend their wheel bearing grease.....

[JHeath]

Jerry Bickel, and some other chassis shops sell this Mobil 1 # 28 synthetic grease

[SSDiv6]

Originally Posted by Race Clean

When visiting Lambs shop several years ago I told him you are using the the same grease we use on our commercial jets and he quickly responded that's because that grease is designed to go from a stand still to 150mph in a second
Never really thought about it that way before he said it!
Dont know if that is the same they use today.

I doubt the Lamb grease is aircraft wheel bearing grease.
The aircraft wheel bearing grease has a viscosity grade of 5.
The normal dyno based, non-synthetic bearing grease is 2.
The Lamb grease appears to have a viscosity of 1.
MicroBlue has 00, 0 and 1 viscosity grades available.

[Dissident]

A very good bearing grease for racing only is Kluber Lubrication Isoflex NBU 15. It is expensive, but very good for the application.
Regards to all that like this kind of stuff,
HB2
Dissident

[SSDiv6]

Originally Posted by Dissident

A very good bearing grease for racing only is Kluber Lubrication Isoflex NBU 15. It is expensive, but very good for the application.
Regards to all that like this kind of stuff,
HB2
Dissident

That is the grease sold by Speedway Motors.

[Race Clean]

Originally Posted by SSDiv6

I doubt the Lamb grease is aircraft wheel bearing grease.
The aircraft wheel bearing grease has a viscosity grade of 5.
The normal dyno based, non-synthetic bearing grease is 2.
The Lamb grease appears to have a viscosity of 1.
MicroBlue has 00, 0 and 1 viscosity grades available.

As I said, it was some time ago,probably more than a decade and they probably using something else today,but at that time! it was this one as I remember it!

https://www.exxonmobil.com/en-US/Avi...Grease-SHC-100

[SG RACER]

Try Daylube. Best stuff I have found and smoothest spinning.

[SGSST109E]

Any synthetic grease, just use a light coat. Back in the modified days we used lubriplate.