Willwood, Strange or Aerospace? - Page 2

MR DERBY CITY · 05-05-2018, 08:23 AM

[QUOTE=Ed Wright;562398]

Quote:

Originally Posted by MR DERBY CITY

Might be the installer, not the parts. Excessive pedal travel, ask and competent automotive technician, is caliper/rotor alignment/cylinder sizing. Too small master cylinder bore = excessive pedal travel. Caliper not square with the rotor = excessive pedal travel. DIY guys usually need a dummy proof install pkg. My car stops great, with no excessive pedal travel. Has for about 8 years now.

The same installer, Bob Gullet,...installed the LAMB brakes with far greater results. I believe Mark Markow sums it up best....

Ed Wright · 05-05-2018, 09:50 AM

Pedal travel is not the brand. SMH
Simple hydraulics. Some seem to need a simple take it all out of a box & bolt it on kit.

CMcAllister · 05-05-2018, 02:31 PM

It should be a simple calculation of piston area and master cylinder bore. But I've seen more than one car with Aerospace kits that should have worked, but didn't. Could not get a pedal, even with a big bore master, until a Lamb master was installed.

And I've seen guys get kits from Wilwood with calipers that had small bores for some reason (ordered wrong part# maybe) and the balance would be all out of whack. Strange has always been plug and play.

Ed Wright · 05-05-2018, 09:10 PM

Installed mine back in 2010, before I closed my shop. I don't know what another brand could do, that these do not. No pedal is not the brand. Wrong pedal ratio, or master cylinder bore. I was warned once about "smoking all 4 tires at the finish line." Didn't realize I locked them up. Wheels roll freely, good pedal, plenty of breaking power.
What else is there?
Maybe they changed something.

05-05-2018, 09:50 AM	#2
Ed Wright Veteran Member Join Date: Mar 2005 Location: Sand Springs, OK Posts: 8,132 Likes: 896 Liked 390 Times in 170 Posts	Re: Willwood, Strange or Aerospace? Pedal travel is not the brand. SMH Simple hydraulics. Some seem to need a simple take it all out of a box & bolt it on kit. __________________ Ed Wright 4156 SS/JA

05-05-2018, 02:31 PM	#3
CMcAllister Senior Member Join Date: Sep 2006 Location: Fulton County, PA Posts: 621 Likes: 17 Liked 925 Times in 263 Posts	Re: Willwood, Strange or Aerospace? It should be a simple calculation of piston area and master cylinder bore. But I've seen more than one car with Aerospace kits that should have worked, but didn't. Could not get a pedal, even with a big bore master, until a Lamb master was installed. And I've seen guys get kits from Wilwood with calipers that had small bores for some reason (ordered wrong part# maybe) and the balance would be all out of whack. Strange has always been plug and play.

05-05-2018, 09:10 PM	#4
Ed Wright Veteran Member Join Date: Mar 2005 Location: Sand Springs, OK Posts: 8,132 Likes: 896 Liked 390 Times in 170 Posts	Re: Willwood, Strange or Aerospace? Installed mine back in 2010, before I closed my shop. I don't know what another brand could do, that these do not. No pedal is not the brand. Wrong pedal ratio, or master cylinder bore. I was warned once about "smoking all 4 tires at the finish line." Didn't realize I locked them up. Wheels roll freely, good pedal, plenty of breaking power. What else is there? Maybe they changed something. __________________ Ed Wright 4156 SS/JA

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode