1967 Dodge Dart question

FED 387 · 06-23-2016, 08:32 PM

If you are going to use the later disc brake stuff you must use everything from between ball joint to ball joint you should also use the proportion ing valve from the donor car and quite possibly the upper. control arms too

Coleydog · 06-23-2016, 09:53 PM

Stock drums can be drilled for the bigger 4.5 bolt circle or go to the aluminum hubs and rotor kit from Strange, fits the drum spindle.

06-23-2016, 08:32 PM	#1
FED 387 VIP Member Join Date: Jun 2006 Posts: 3,424 Likes: 547 Liked 334 Times in 181 Posts	Re: 1967 Dodge Dart question If you are going to use the later disc brake stuff you must use everything from between ball joint to ball joint you should also use the proportion ing valve from the donor car and quite possibly the upper. control arms too

06-23-2016, 09:53 PM	#2
Coleydog Senior Member Join Date: Jul 2014 Posts: 572 Likes: 39 Liked 53 Times in 38 Posts	Re: 1967 Dodge Dart question Stock drums can be drilled for the bigger 4.5 bolt circle or go to the aluminum hubs and rotor kit from Strange, fits the drum spindle.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode