Float level 4300

rich freitag · 02-02-2016, 07:32 PM

Ok so everyone replied all at once,I did it my self ,set the floats at pri 13/16 sec 1/16.Also opened up the fuel inlets,modified the needle and seat(notch the bottom of the inlet ).I run 6psi.

GTX JOHN · 02-13-2016, 03:33 AM

George Thompson "Carb. Flow Engineering" is only 4300 genius
I know......I will ask him tomorrow at races and see if he recalls without
checking his notes or can call me.

02-02-2016, 07:32 PM	#1
rich freitag Junior Member Join Date: Mar 2008 Location: cicero n.y. Posts: 29 Likes: 7 Liked 0 Times in 0 Posts	Re: Float level 4300 Ok so everyone replied all at once,I did it my self ,set the floats at pri 13/16 sec 1/16.Also opened up the fuel inlets,modified the needle and seat(notch the bottom of the inlet ).I run 6psi. __________________ Rich Freitag 1440 SS

02-13-2016, 03:33 AM	#2
GTX JOHN VIP Member Join Date: Jun 2009 Location: Boulder City, Nevada 89005 Posts: 2,737 Likes: 2,816 Liked 2,489 Times in 699 Posts	Re: Float level 4300 George Thompson "Carb. Flow Engineering" is only 4300 genius I know......I will ask him tomorrow at races and see if he recalls without checking his notes or can call me. __________________ John Irving 741 Stock 741 Super Stock Last edited by GTX JOHN; 02-13-2016 at 03:35 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode