|
|
|
|
08-12-2015, 08:42 AM
|
#1 |
|
Junior Member
Join Date: Jun 2015
Location: Clearwater FL
Posts: 11
Likes: 0
Liked 0 Times in 0 Posts
|
Re: FS/H CobraJet Body In White Project
Very nice build good luck.
|
|
|
|
09-20-2015, 10:38 PM
|
#2 |
|
Member
Join Date: Nov 2002
Location: Michigan
Posts: 185
Likes: 10
Liked 408 Times in 35 Posts
|
Re: FS/H CobraJet Body In White Project
Getting closer. Lots of little details to finish up. Here some more pictures.
 Fitting the BigStuff EFI harness to the engine.  Dashboard bolted in and tach mounted.  9 inch wide Hoosier tires mounted on CobraJet wheels.  I modified the Moroso inline radiator cap so I could pickup up temperature for the BigStuff ECU and the electric water temp gauge. The Coyote cylinder heads don't really have any threaded holes or even any good places to drill and tap a threaded hole to mount a temperature sensor.  I bent and fit two panels to cover and flatten out the back seat area to make it easier to lay a piece of carpet back there.  American Racing Headers moched up on engine. The Lakewood bellhousing is only temporary. I will be using a Browell bellhousing.  Engine set in car for moch up purposes. I will most likely come back out in a few days after I fit the fuel lines from the rails to the regulator and a few other items.  Engine moched up in car.  Engine and drivers side header moched up in car.
__________________
George Wright https://9500rpm.com |
|
|
|
|
09-21-2015, 08:41 AM
|
#3 |
|
Member
Join Date: Jan 2008
Posts: 352
Likes: 18
Liked 19 Times in 12 Posts
|
Re: FS/H CobraJet Body In White Project
Awesome
__________________
Mitch Beri- The Motor City 1985 GT- “Stock-ish” 5.0 motor, AOD/ trans brake. 12.68 @ 101.31mph. https://www.facebook.com/groups/FOXBODYFLEAMARKET/ |
|
|
|
|
09-21-2015, 10:46 AM
|
#4 |
|
Member
Join Date: May 2010
Posts: 253
Likes: 287
Liked 84 Times in 42 Posts
|
Re: FS/H CobraJet Body In White Project
looks real good George. Where can I get a set of those spiffy Ford fender covers? One thing that was handy on the Holley EFI I used was that it hooked up to the stock temp sending unit.
__________________
Bob Tilton 568 FS/H |
|
|
|
|
09-21-2015, 11:20 AM
|
#5 |
|
Member
Join Date: Apr 2012
Location: Harrison Twp. MI
Posts: 108
Likes: 83
Liked 3 Times in 3 Posts
|
Re: FS/H CobraJet Body In White Project
Sweet George! get her done and do Indy next month... haha I know it's a lot easier said than done.
__________________
Sam Monteleone 3348 S/SS |
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
