Motor won't start after 2nd rd?

Alan Roehrich · 05-25-2015, 05:29 PM

If it cranks but will not start, as others said, check the ignition switch, the coil, the coil wire, the pick up (what ever style, magnetic or optical, at the crank or in the distributor), and the ignition box.

Keith 944 · 05-25-2015, 10:21 PM

Hey Cal it did start 3rd round so it must be getting better, I would leave it alone....lmao

FED 387 · 05-26-2015, 11:33 AM

I would swap out first the coil----what coil and part number are you using?? next swap out the ignition box-- what box and part number are you using--- FED 387

05-25-2015, 05:29 PM	#1
Alan Roehrich Veteran Member Join Date: May 2006 Location: Murfreesboro TN Posts: 5,118 Likes: 1,573 Liked 1,837 Times in 417 Posts	Re: Motor won't start after 2nd rd? If it cranks but will not start, as others said, check the ignition switch, the coil, the coil wire, the pick up (what ever style, magnetic or optical, at the crank or in the distributor), and the ignition box. __________________ Alan Roehrich 212A G/S

05-25-2015, 10:21 PM	#2
Keith 944 VIP Member Join Date: Feb 2006 Location: Dela-where? Posts: 2,195 Likes: 1,162 Liked 1,882 Times in 578 Posts	Re: Motor won't start after 2nd rd? Hey Cal it did start 3rd round so it must be getting better, I would leave it alone....lmao __________________ KEITH MAYERS 2-1/2 X somebody Still many X nobody

05-26-2015, 11:33 AM	#3
FED 387 VIP Member Join Date: Jun 2006 Posts: 3,422 Likes: 529 Liked 333 Times in 180 Posts	Re: Motor won't start after 2nd rd? I would swap out first the coil----what coil and part number are you using?? next swap out the ignition box-- what box and part number are you using--- FED 387

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode