HOME FORUM RULES CONTACT
     
   
   

Go Back   CLASS RACER FORUM > Class Racer Forums > Stock and Super Stock Tech

Reply
 
Thread Tools Display Modes
Old 03-17-2015, 09:57 PM   #1
Ronnie Smith Jr
Member
 
Ronnie Smith Jr's Avatar
 
Join Date: Sep 2003
Location: Maryland
Posts: 220
Likes: 0
Liked 0 Times in 0 Posts
Default Re: weather station & antenna mounting?

When I used my weather station I placed the antenna on the trailer roof as part of my weekend routine set-up. In other words, I removed it from the box at the beginning of the race weekend, placed it on the roof and then placed it in the box as I was packing up readying to depart.

For the wind gauge, etc, I found that the gauge would fit nicely on the end of a piece of galvanized wire conduit. As part of my packing/unpacking/setup routine, I would go through these steps each race. I bought an 8 foot galvanized conduit, set it up as a removable piece of equipment on the front of the trailer with removable conduit straps pre drilled into the trailer skin with the original trailer screws. The conduit end rested on the ground, secured by the straps in two locations while mounted to the front of the trailer and the weather station gauge affixed to the top of the conduit.

Never had any issues with the gauge/antenna etc due to weather. It was a consistent placement on the trailer each time.

Hope this helps and is the info you were searching for.
__________________
Ronnie Smith, Jr.
Ronnie Smith Jr is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:10 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.