S&W Anti roll bar one more time.

Bobby Fazio · 08-22-2014, 10:09 AM

Quote:

Originally Posted by Rob Petrie E395

A while back there was a thread on here about the ARB that S&W makes for 82-02 Camaro and Firebirds. Before I spend 500 plus shipping on one. Has anyone had a problem getting through tech with one recently? I have heard that they are now legal. Can anyone confirm this? Was planning on asking this weekend at Gateway. But could not get away from work to go.

Thanks
Rob

As far as I know, if it's bolt in it is legal. If it requires welding it is illegal. If it is bolted to something that has been welded to the frame, then it is questionable.

zracer305 · 08-23-2014, 08:54 PM

One of the fastest LT1 Camaros in the land runs this S&W anti-rollbar setup.

Stock726 · 08-25-2014, 08:33 PM

Does anyone in tech even look underneath cars anymore??

Mark Yacavone · 08-25-2014, 08:41 PM

Quote:

Originally Posted by zracer305

One of the fastest LT1 Camaros in the land runs this S&W anti-rollbar setup.

How is that upper cross bar fastened to the frame, or subframe I guess I should say?

Doug Blackley · 08-25-2014, 10:48 PM

On the previous thread a number of the division tech directors weighed in on this very set up. Before purchasing one for your stocker I would suggest you contact your divisions tech director for their thoughts. I will say that if set up properly nothing more than the factory installed sway bar is necessary to make these cars work

zracer305 · 08-27-2014, 12:31 AM

Quote:

Originally Posted by Doug Blackley

On the previous thread a number of the division tech directors weighed in on this very set up. Before purchasing one for your stocker I would suggest you contact your divisions tech director for their thoughts. I will say that if set up properly nothing more than the factory installed sway bar is necessary to make these cars work

I agree Doug!!! But, let's not forget the correct shocks, springs and solidly maintaining pinion angle throughout the launch. I set these cars up like a 3-link. Shooting for zero anti-squat. I will soon be testing my new torque arm setup. If it works to my satisfaction I'll post some pictures.

Rich Biebel · 08-27-2014, 05:16 AM

The '97 Firebird I raced in stock had no anti roll bar. Never needed it. Pretty much always hooked well and went straight with no chassis twist. Very hard leaving car, front end in the air every run.

Modified stock torque arm.....bolt on traction bars.

Shaun Quill · 08-29-2014, 12:42 PM

Quote:

Originally Posted by Doug Blackley

On the previous thread a number of the division tech directors weighed in on this very set up. Before purchasing one for your stocker I would suggest you contact your divisions tech director for their thoughts. I will say that if set up properly nothing more than the factory installed sway bar is necessary to make these cars work

I agree,i just put a real fat sway bar on mine and it worked great. Real simple and the car left nice and square

Rob Petrie E395 · 08-29-2014, 03:50 PM

I have not been able to get a positive answer on this from NHRA.. So I am going to put a regular sway bar in it. I know thats legal. LOL Thanks for trying to help me guys.

zracer305 · 08-27-2014, 12:13 AM

Quote:

Originally Posted by Mark Yacavone

How is that upper cross bar fastened to the frame, or subframe I guess I should say?

http://www.swracecars.com/Files/pdf/40-613.pdf

08-23-2014, 08:54 PM	#2
zracer305 Member Join Date: Jul 2007 Posts: 108 Likes: 0 Liked 0 Times in 0 Posts	Re: S&W Anti roll bar one more time. One of the fastest LT1 Camaros in the land runs this S&W anti-rollbar setup. Attached Thumbnails

08-25-2014, 08:33 PM	#3
Stock726 Junior Member Join Date: Jan 2009 Posts: 72 Likes: 24 Liked 39 Times in 10 Posts	Re: S&W Anti roll bar one more time. Does anyone in tech even look underneath cars anymore??

08-25-2014, 10:48 PM	#5
Doug Blackley Member Join Date: Dec 2001 Location: Hanover, MA Posts: 430 Likes: 3 Liked 1 Time in 1 Post	Re: S&W Anti roll bar one more time. On the previous thread a number of the division tech directors weighed in on this very set up. Before purchasing one for your stocker I would suggest you contact your divisions tech director for their thoughts. I will say that if set up properly nothing more than the factory installed sway bar is necessary to make these cars work __________________ Doug Blackley 1697 STK

08-27-2014, 05:16 AM	#7
Rich Biebel VIP Member Join Date: Jun 2007 Location: Northern New Jersey suburbs Posts: 2,320 Likes: 25 Liked 557 Times in 217 Posts	Re: S&W Anti roll bar one more time. The '97 Firebird I raced in stock had no anti roll bar. Never needed it. Pretty much always hooked well and went straight with no chassis twist. Very hard leaving car, front end in the air every run. Modified stock torque arm.....bolt on traction bars. __________________ Rich Biebel S/C 1479 Stock 147R

08-29-2014, 03:50 PM	#9
Rob Petrie E395 VIP Member Join Date: Dec 2007 Location: Woodlawn IL Posts: 1,092 Likes: 162 Liked 216 Times in 77 Posts	Re: S&W Anti roll bar one more time. I have not been able to get a positive answer on this from NHRA.. So I am going to put a regular sway bar in it. I know thats legal. LOL Thanks for trying to help me guys.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode