|
04-01-2014, 08:42 AM | #11 |
VIP Member
Join Date: Dec 2001
Location: Pontiac,il.
Posts: 1,141
Likes: 238
Liked 889 Times in 166 Posts
|
Re: v/s "battles" years ago.....
I was at the 72 Spring Nats when Mr. kronnenbitter was runner up toBobby Warren.The Big old Chevy was a huge fan favorite.Nobdy left the stands then when Stockers came up,and the big head start he got really got the fans attention.It didnt hurt that he was a local guy either.
|
04-01-2014, 10:54 AM | #12 |
VIP Member
Join Date: Dec 2001
Location: Arkansas - In the middle of everything.
Posts: 1,986
Likes: 55
Liked 731 Times in 180 Posts
|
Re: v/s "battles" years ago.....
Lyn, I was there too! If I remember correctly, Kronnenbitter had feeler gauge strips at each corner of the carb spacing it up from the manifold. I heard him speaking to somebody else who was helping him work on the car that they may have to add "another .005" and two more jet sizes" for the final. I assumed he was talking about adding more space under the carb.
|
04-01-2014, 12:44 PM | #13 |
VIP Member
Join Date: Sep 2010
Location: Mississippi Gulf Coast
Posts: 2,483
Likes: 68
Liked 87 Times in 63 Posts
|
Re: v/s "battles" years ago.....
Dwight,
Do you remember Dwight Cox's T/S '60 chevy 4 dr? Looking at the one above made me remember it. Ran better after it was painted, still broke a 3spd every week. Last edited by Charlie A; 04-01-2014 at 05:57 PM. |
04-01-2014, 01:03 PM | #14 |
VIP Member
Join Date: Dec 2001
Location: Pontiac,il.
Posts: 1,141
Likes: 238
Liked 889 Times in 166 Posts
|
Re: v/s "battles" years ago.....
Did they even use a base gasket?
|
04-01-2014, 01:21 PM | #15 |
Senior Member
Join Date: Apr 2003
Location: Aberdeen SD
Posts: 643
Likes: 29
Liked 106 Times in 29 Posts
|
Re: v/s "battles" years ago.....
Remember how you'd "clip" the power valve spring so she'd idle with the big cam. Well with the old two-bbls., you'd leave the power valve spring alone so she'd kinda idle with all the air leaks.
Two gaskets Lyn. Feeler gauges in the middle. Things haven't improved all that much on teching vac leaks. I know of several smaller carbed cars that have very loose carbs. Jerry |
04-01-2014, 08:32 PM | #16 |
Member
Join Date: May 2003
Location: Billings Mt
Posts: 280
Likes: 140
Liked 54 Times in 18 Posts
|
Re: v/s "battles" years ago.....
That would be considered a very minor infraction these days
|
04-02-2014, 07:46 AM | #17 |
VIP Member
Join Date: Dec 2001
Location: Arkansas - In the middle of everything.
Posts: 1,986
Likes: 55
Liked 731 Times in 180 Posts
|
Re: v/s "battles" years ago.....
Yes. Cox was too cheap to buy the Lenco synchronizer drum and any of Alex Jarrel's parts that helped the old 3speeds live. He bought my 3spd parts but it was at the end of the season and they built the '66 for the next year.
|
04-02-2014, 09:56 AM | #18 |
VIP Member
Join Date: Oct 2002
Location: On a hilltop in Pa.
Posts: 4,329
Likes: 3,335
Liked 7,196 Times in 1,610 Posts
|
Re: v/s "battles" years ago.....
Over the years, I've tried "leaker" tricks on some of my stuff but it always made the car so nasty to drive and so difficult to make it repeat that I just gave up. I never found enough in it to make it worth my while.
In this day and age, my time would probably be better spent petitioning the NHRA to just let me use the "bus" carburetor and the 11-1 "high altitude commercial" pistons.
__________________
Billy Nees 1188 STK, SS I'm OK..........it's everybody else. Last edited by Billy Nees; 04-02-2014 at 10:00 AM. Reason: addition |
04-02-2014, 04:37 PM | #19 |
VIP Member
Join Date: Dec 2001
Location: Arkansas - In the middle of everything.
Posts: 1,986
Likes: 55
Liked 731 Times in 180 Posts
|
Re: v/s "battles" years ago.....
But, Billy, the AMC guys did that and you didn't like it! Just a little prejudice there?
|
04-02-2014, 06:02 PM | #20 |
VIP Member
Join Date: Oct 2002
Location: On a hilltop in Pa.
Posts: 4,329
Likes: 3,335
Liked 7,196 Times in 1,610 Posts
|
Re: v/s "battles" years ago.....
at least they came on 230 engines from Chevrolet. They just happened to be truck engines.
__________________
Billy Nees 1188 STK, SS I'm OK..........it's everybody else. |
Thread Tools | |
Display Modes | |
|
|