Who makes the best timing chain?

[carl hinkson]

Originally Posted by MEXJOE

Had Cloyes BBC timing chain 6 dyno pulls, 4 passes and the thing stretched out caused a dropped valve?????
Is every thing just JUNK now?
Who makes the best Timing chain?

A stretched chain caused a valve to drop??? Could explain how this happened as I have taken apart a lot of engines over the last 38 years with stretched out or worn out timing chains and gears but never seen dropped valve because of this.

I have seen many times where guys will use stock cam bearings where a performance cam bearing should be used,

Stock cam bearings used with high lift cams and springs with a lot of seat and over the nose pressure will tend to flatten the cam bearings causing the chain to be loose.

I use a lot Cloyes Hex-A-Just both BBC and SBC and so far no dropped valves LOL.

[1320racer]

Originally Posted by carl hinkson

A stretched chain caused a valve to drop??? Could explain how this happened as I have taken apart a lot of engines over the last 38 years with stretched out or worn out timing chains and gears but never seen dropped valve because of this.

53 year old carl's latest claim making him an internet expert, now has him building engines since he was 15.

[carl hinkson]

Originally Posted by 1320racer

53 year old carl's latest claim making him an internet expert, now has him building engines since he was 15.

Actually my first build was at my grandfathers shop at the age of 13 when was your first build????

Actually started Hinkson Automotive in 1977 do have a problem with that ?????????????????

http://www.manta.com/c/mm57x90/hinkson-automotive

[1320racer]

http://www.cncblockne.com/

[carl hinkson]

Originally Posted by 1320racer

http://www.cncblockne.com/

Dick if you want to believe John Supino who use to work for work World Products and where is he now??? FIRED LOL. Dick I offer Dart Products that's why John put up a blog against me, And how many websites has John been thrown off with his blog LOL. And we will see what happens when John ends up in court for slander.

Dick here is my Face book page
https://www.facebook.com/cncblocks.northeast

Dick what is your claim to fame and haven't been thrown of a few websites LOL

[1320racer]

http://www.cncblockne.com/how-old-is-carl.shtml

[carl hinkson]

Originally Posted by 1320racer

http://www.cncblockne.com/how-old-is-carl.shtml

I guess you missed this

Originally Posted by carl hinkson

Actually my first build was at my grandfathers shop at the age of 14 when was your first build????

Actually started Hinkson Automotive in 1977 do have a problem with that ?????????????????

http://www.manta.com/c/mm57x90/hinkson-automotive

[carl hinkson]

Originally Posted by 1320racer

http://www.cncblockne.com/how-old-is-carl.shtml

1320 racer is this you LOL. this was just sent to me LOL.

http://www.yellowbullet.com/forum/sh...ight=Ed+Bigley

[MEXJOE]

.050 EX Valve clearance, may have contributed to it? I don't know? I make signs and decals I am not an engine builder. I was just saying what I thought may have happened with the evidence I had at face value.
Glen
[QUOTE=1320racer;394596]53 year old carl's latest claim making him an internet expert, now has him building engines since he was 15. [/