|
|
|
|
04-21-2013, 09:51 PM
|
#1 |
|
Member
Join Date: Oct 2002
Location: kansas
Posts: 235
Likes: 498
Liked 249 Times in 48 Posts
|
Re: Oil Filters?
Yes.
Pete |
|
|
|
04-22-2013, 06:54 AM
|
#2 | |
|
Junior Member
Join Date: Jan 2009
Location: Missouri
Posts: 45
Likes: 2,787
Liked 13 Times in 11 Posts
|
Re: Oil Filters?
Quote:
Steve |
|
|
|
|
|
04-22-2013, 07:09 AM
|
#3 |
|
VIP Member
Join Date: Jan 2009
Location: Maryland
Posts: 1,733
Likes: 1,599
Liked 459 Times in 90 Posts
|
Re: Oil Filters?
Wix Racing filter the BEST !!!
__________________
Bob Bender 144 O/SA 2010-2012 National Record Holder |
|
|
|
|
04-22-2013, 07:42 AM
|
#4 |
|
VIP Member
Join Date: Dec 2001
Location: Richmond Hill, Georgia
Posts: 2,003
Likes: 0
Liked 1 Time in 1 Post
|
Re: Oil Filters?
My filter is positioned after the pump.
__________________
Art Leong 2095 SS |
|
|
|
|
04-22-2013, 08:08 AM
|
#5 |
|
Senior Member
Join Date: Jul 2007
Posts: 557
Likes: 6
Liked 13 Times in 3 Posts
|
Re: Oil Filters?
Art, yes a filter can affect oil pressure. The differance's in the filtering elements can either cause more or less of a restriction and in turn drop or raise oil pressure. I have seen over 10 psi change from differant filters
Chuck |
|
|
|
|
04-22-2013, 11:55 AM
|
#6 |
|
Member
Join Date: Feb 2009
Location: Milford, MI
Posts: 147
Likes: 12
Liked 8 Times in 5 Posts
|
Re: Oil Filters?
Artie,
The Viper filter is one of the best, has a low restriction element with a high burst canister. It will result in a lower pressure reading at idle but it has a higher flow rate cause at high rpm's. There are several part numbers available and one of them had some issues, will have to check. John
__________________
John Donato Stk / SS 3435 |
|
|
|
|
04-22-2013, 01:24 PM
|
#7 |
|
VIP Member
Join Date: Jun 2006
Posts: 3,419
Likes: 528
Liked 332 Times in 180 Posts
|
Re: Oil Filters?
Not positive but I seem to think that the P4529190 filter has a bypass of like 8-10 PSI and a flow rate of 28-30 GPM vs. the "stock type " Neon filter which has a bypass of like 25-30 PSI and a flow rate of only 7-9 GPM--probably why the pressure is coming up so low----less restricton and more oil flowing(volume) ---put a wix 51515R on it and see what happens they are really the way to go---otherwise put a Peterson in line filter on the inner fender but then you hafta run braided line and all----FED387
|
|
|
|
|
04-23-2013, 09:47 AM
|
#8 | |
|
VIP Member
Join Date: Dec 2001
Location: Richmond Hill, Georgia
Posts: 2,003
Likes: 0
Liked 1 Time in 1 Post
|
Re: Oil Filters?
Quote:
__________________
Art Leong 2095 SS |
|
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
