2 barrel analysis question

Dennis P Chapman · 03-23-2013, 06:44 PM

Quote:

Originally Posted by Joe DeMarzo

Lee you are killing me.... I am laughing hard.

Thanks for the analysis.

So it would be a bad move I am guessing in '72 350/200.

Joe.......Back away from the car seat down have a cigar the snow will go away.

Steve Calabro · 03-23-2013, 06:58 PM

Must be hanging out with Joe Zoom to much!

At least Zoom has an enclosed trailer! LOL

Tom Meyer · 03-23-2013, 07:11 PM

Mike town has been runnig the two barrel stuff on his 350 SS stuff for a long time now and runnig very good I mite add. Mike his son Jeff and Tony Shaffer are all on 2 barrels, try getting a hold of him. Tom

SCOTT TILLEY · 03-24-2013, 04:29 PM

What is the rule on carb spacers in stock? What are they in SS? There is a lot to be found in working on 2 bbl spacers and adapters. I run a 2 bbl in IHRA SS Production. Been working with the Holley 2 bbl's for a long time. I'm sure the 2GC's are different but working with how the air/fuel comes out from the base plate into the manifold can net substantial gains.

Thanks
Scott Tilley
IHRA SS/PDAII

Dave Ribeiro · 03-24-2013, 09:36 PM

Scott , you have a PM....

Bench Racer · 03-24-2013, 10:04 PM

Tom, do you have any additional info on the 2 bbl. cars you mentioned? I was at Indy 6 or 8 years ago and talked with a guy about a Superstock car that (was I think a 350) ran a 2bbl. Anything that is unusual, thinking out of the box, or what most would call an "odd ball" combo always gets my attention and vote lol, so i was hooked. The owner told me that the car was not as aerodynamic as most ( I think it was a malibu or a late model cutlass body) and was not efficent at the upper MPH, but with the 2 bbl. combo it ran pretty well. Could this be who you were talking about? Thanks, Don Jackson

Robert Simpson · 03-24-2013, 11:01 PM

I am interested in a 2bbl carb and intake for a 69 chevy 350/250hp combo. If anyone has anything let me know.

Robert Simpson · 03-27-2013, 11:13 AM

Scott, did you get my PM?

Quote:

Originally Posted by SCOTT TILLEY

What is the rule on carb spacers in stock? What are they in SS? There is a lot to be found in working on 2 bbl spacers and adapters. I run a 2 bbl in IHRA SS Production. Been working with the Holley 2 bbl's for a long time. I'm sure the 2GC's are different but working with how the air/fuel comes out from the base plate into the manifold can net substantial gains.

Thanks
Scott Tilley
IHRA SS/PDAII

03-23-2013, 06:58 PM	#2
Steve Calabro Member Join Date: Jun 2007 Location: New Jersey Posts: 198 Likes: 225 Liked 43 Times in 12 Posts	Re: 2 barrel analysis question Must be hanging out with Joe Zoom to much! At least Zoom has an enclosed trailer! LOL __________________ Steve Calabro 1199 STK, SS Last edited by Steve Calabro; 03-23-2013 at 07:00 PM. Reason: more

03-23-2013, 07:11 PM	#3
Tom Meyer Senior Member Join Date: Aug 2003 Location: Pierce NE Posts: 936 Likes: 78 Liked 354 Times in 120 Posts	Re: 2 barrel analysis question Mike town has been runnig the two barrel stuff on his 350 SS stuff for a long time now and runnig very good I mite add. Mike his son Jeff and Tony Shaffer are all on 2 barrels, try getting a hold of him. Tom __________________ Tom Meyer 5240 SS Stock ???

03-24-2013, 04:29 PM	#4
SCOTT TILLEY Member Join Date: Jul 2006 Location: WAKE FOREST,NC Posts: 161 Likes: 90 Liked 3 Times in 3 Posts	Re: 2 barrel analysis question What is the rule on carb spacers in stock? What are they in SS? There is a lot to be found in working on 2 bbl spacers and adapters. I run a 2 bbl in IHRA SS Production. Been working with the Holley 2 bbl's for a long time. I'm sure the 2GC's are different but working with how the air/fuel comes out from the base plate into the manifold can net substantial gains. Thanks Scott Tilley IHRA SS/PDAII

03-24-2013, 09:36 PM	#5
Dave Ribeiro VIP Member Join Date: Sep 2002 Location: Williamsburg, Va.---USA Posts: 1,827 Likes: 1,612 Liked 56 Times in 27 Posts	Re: 2 barrel analysis question Scott , you have a PM.... __________________ Dave Ribeiro 1033 STK Last edited by Dave Ribeiro; 03-24-2013 at 09:39 PM.

03-24-2013, 10:04 PM	#6
Bench Racer Member Join Date: May 2002 Location: Green Creek (Tryon) North Carolina Posts: 331 Likes: 69 Liked 99 Times in 21 Posts	Re: 2 barrel analysis question Tom, do you have any additional info on the 2 bbl. cars you mentioned? I was at Indy 6 or 8 years ago and talked with a guy about a Superstock car that (was I think a 350) ran a 2bbl. Anything that is unusual, thinking out of the box, or what most would call an "odd ball" combo always gets my attention and vote lol, so i was hooked. The owner told me that the car was not as aerodynamic as most ( I think it was a malibu or a late model cutlass body) and was not efficent at the upper MPH, but with the 2 bbl. combo it ran pretty well. Could this be who you were talking about? Thanks, Don Jackson

03-24-2013, 11:01 PM	#7
Robert Simpson Senior Member Join Date: Aug 2004 Location: Jacksonville, Florida Posts: 808 Likes: 7 Liked 20 Times in 12 Posts	Re: 2 barrel analysis question I am interested in a 2bbl carb and intake for a 69 chevy 350/250hp combo. If anyone has anything let me know.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode