Mopar Ball Joints

Todd Boyer · 11-08-2012, 01:27 PM

Mark, the above kit looks like a good idea for adapting the '73-'76 -larger/beefier/BUT heavier- knuckles to the early ball joints, but you'd still be using the same early (small) ball joint and control arm. If it's the early ball joint and control arm that is the issue, this kit isn't gonna be of much help.

Afco makes low friction all joints, not sure about 'better quality' as John asked for, but likely are.

http://www.afcoracing.com/#

11-08-2012, 01:27 PM	#10
Todd Boyer Senior Member Join Date: Feb 2004 Location: Saint John NB Canada Posts: 561 Likes: 30 Liked 6 Times in 5 Posts	Re: Mopar Ball Joints Mark, the above kit looks like a good idea for adapting the '73-'76 -larger/beefier/BUT heavier- knuckles to the early ball joints, but you'd still be using the same early (small) ball joint and control arm. If it's the early ball joint and control arm that is the issue, this kit isn't gonna be of much help. Afco makes low friction all joints, not sure about 'better quality' as John asked for, but likely are. http://www.afcoracing.com/# Last edited by Todd Boyer; 11-08-2012 at 01:40 PM. Reason: added material

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode