1997 Neon 4 door Stocker

[art leong]

Originally Posted by JSLRacing

I have been away from drag racing for about 5 years.. I was the 1997 Track Champion and Race of Champions winner in Div 3 at Indy in my rookie year. I ran a a hired gun for a few years and ran my own cars.. they stopped in 2005.

Now I think it's time to finish one of my "Bucket List" items.. to run a National Event. I only live an hour from Grand Bend Motorplex that holds an NHRA event every year.

What I have to run is my recently retired 1997 Neon 4 door Automatic. SOHC 2.0 litre

Looking at the NHRA site it shows the car has factored 18.22 lbs/hp. I'm not sure which class it would fit into.

I have a few questions.

- Can I run an aftermarket computer?
- Does anyone know if there is a "stocker" cam for the SOHC
- Can you get the stock converter loosened up for higher stall?
- Suggestions for increasing the gear ratio
- Can I got the dash as long as the factory instruments are in place to look stock?

I wish it was a stick... but this is what i have.. so this is what I'm gonna run..

You can run any computer.
You can run any cam, you are allowed .430 lift there are no cams built for the SOHC that big. Crane and Cam Dynamics both make cams for that engine.
Forward Motion in Delaware can get you a custom converter. But it will not be "streetable", or cheap.
Gear ratio you can get a set of 1.22 side gears. They go for $100 to $200 used They haven't been made for 10 years. Or you can spend a lot more than you could imagine for a set of custom gears..
Try Neons.org to see how to lighten it.
The main problem with the Neon in stock is you have to run the turbo dodges And there is no way you can beat the speed screw. Without a ton of money

[John Dinkel]

Last time I knew Grand bend was IHRA

[JSLRacing]

sorry.. I meant that Grand Bend is IHRA.. fingers before brain...

I'm sure you can still get the side gears at Howell..

Where did you get your LSD Art?

Any suggestion on a computer?

I'll go digging on the NHRA site for the rulebook now...

[art leong]

Originally Posted by JSLRacing

sorry.. I meant that Grand Bend is IHRA.. fingers before brain...

I'm sure you can still get the side gears at Howell..

Where did you get your LSD Art?

Any suggestion on a computer?

I'll go digging on the NHRA site for the rulebook now...

Don't bet on the side gears from Howell. See them before you buy them.
I use a spool Tim Kish had them made. I think he still has some.
I use a ViPec standalone. The Mopar performance is a lot cheaper, but it isn't going to help much

[JSLRacing]

Are you running the V44 or the V88...

What type of cost will the computer run me?... Will the tranny be computer controlled anymore?

[Tim Kish]

There are definitely thinks you can so with the trans and converter, you'll need as much as you can get.

PM me with questions or if you are coming to Indy stop by and chat.

[JSLRacing]

Thanks... I will definitely do that..

[art leong]

Originally Posted by JSLRacing

Are you running the V44 or the V88...

What type of cost will the computer run me?... Will the tranny be computer controlled anymore?

I'm running the V44.I think you get get it up and running for less than $2000. The only thing that is linked to the ECU is the lockup part of the converter.
Try Neons.org there are a lot of guys there running SOHC engines with Mega squirt set ups. That would save you a lot of money.
Upon further thought I don't know if you can run the ViPec system because you need to use a crank trigger and I'm not sure if thats legal

[JSLRacing]

Art.. do you have a list of acceptable replacement pistons.. and the minimum deck height allowable? I didn't see it in the blueprint..