Re: Question for Dodge Dart Stocker Racers
Todd,
I have a Volare Stocker (F body not an A body) and I just put a new set of Hole Shot wheels on it replacing the Welds it had. The rear wheel back spacing I used was 4 7/8" which gives me 5/8" clearance to the Calvert springs. The Welds that I replaced were 4 1/2" backspacing.This is with no wheel lip massaging and an stock width 8 3/4 rear. I'm not sure but I if the back spacing on the A body and the F body are the same but I have been told they are. Jim
__________________
Jim Wahl....NHRA #2239 S/SS - IHRA # 8 Stock, D2 Stock Champion (forever I guess)
2019 Baby Gators Stock Champion
2009 NHRA D2 National Open Stock Champion
1982 NHRA D2 West Palm Beach LDRS SS Runner Up
Past President, Southern Stock / Super Stock Association. 
Last edited by Jim Wahl; 10-06-2009 at 01:35 PM.
|
10-06-2009, 01:33 PM
Threaded Mode