|
|
12-06-2023, 02:21 PM
|
#1 |
|
Member
Join Date: Dec 2009
Location: Kingman, NW AZ. in the middle of the longest stretch of Route 66
Posts: 315
Likes: 0
Liked 20 Times in 15 Posts
|
measuring cams
going thru a pile of old SBC cams. I put a known cam in my lathe, which I knew the specs [a std. hyd. 350, 390" x 410"] . I originally thought the base 180 from the nose would be 0. but found, in order to get that lift #, I had to set 0 on the closing flank after max. lift. having no experience doing this...your thoughts.
thanks Rod in AZ |
|
|
|
|
Threaded Mode