nostalgia racer 1955 chevrolet stick shift

weedburner · 06-11-2017, 12:36 PM

Maybe the clutch wasn't broken in yet, that clutch should be fine at that power level. If the surfaces were freshly machined I could see the organic side pulling loose with too much grip while the metallic side was still slipping.

If it's pretty even 50/50 street strip, I would use that same PP and step up to a 900 series iron disc. Engagement would be a little harsh, but harsh engagement can be mechanically buffered without too much trouble.

06-11-2017, 12:36 PM	#2
weedburner Junior Member Join Date: Apr 2016 Posts: 55 Likes: 1 Liked 20 Times in 16 Posts	Re: nostalgia racer 1955 chevrolet stick shift Maybe the clutch wasn't broken in yet, that clutch should be fine at that power level. If the surfaces were freshly machined I could see the organic side pulling loose with too much grip while the metallic side was still slipping. If it's pretty even 50/50 street strip, I would use that same PP and step up to a 900 series iron disc. Engagement would be a little harsh, but harsh engagement can be mechanically buffered without too much trouble.