Bellhousing alignment issue

JohnRoderick · 06-21-2015, 02:26 PM

Thanks for all the suggestions.

At this point I am working with a local machinist to make sleeves for the block, so I can use the original RobbMc offset pins that I purchased. The main deciding factor for me was this solution allows me to keep using off the shelf offset dowel pins in the future. I can only imagine loosing a custom dowel pin and having to do this whole process over.

John

06-21-2015, 02:26 PM	#9
JohnRoderick Junior Member Join Date: Apr 2011 Posts: 75 Likes: 5 Liked 11 Times in 4 Posts	Re: Bellhousing alignment issue Thanks for all the suggestions. At this point I am working with a local machinist to make sleeves for the block, so I can use the original RobbMc offset pins that I purchased. The main deciding factor for me was this solution allows me to keep using off the shelf offset dowel pins in the future. I can only imagine loosing a custom dowel pin and having to do this whole process over. John