75 Nova U/SA

Mark Yacavone · 02-09-2015, 11:19 PM

Mikey, Here's what I'd do out in the back yard.
Get a few of the these and cut the first 8- 10 inches out of each tube..one at a time.
Slip a piece of these of the appropriate size into what you've got there.
You don't have to be a welding pro because the smaller tube is going the right way, if you follow me.
You might be able to slip the tube into the 1 and 5/8 stub on the flange. Mig weld or braze it on the outside of the flange. De -burr and roll the inside edge ,and you got it.
Doubt if it will hurt anything..Might tell you a thing or two.

http://www.speedwaymotors.com/Mild-S...Inch,1734.html

02-09-2015, 11:19 PM	#12
Mark Yacavone Veteran Member Join Date: Mar 2002 Location: Miles From Nowhere Posts: 7,818 Likes: 2,909 Liked 5,126 Times in 1,954 Posts	Re: 75 Nova U/SA Mikey, Here's what I'd do out in the back yard. Get a few of the these and cut the first 8- 10 inches out of each tube..one at a time. Slip a piece of these of the appropriate size into what you've got there. You don't have to be a welding pro because the smaller tube is going the right way, if you follow me. You might be able to slip the tube into the 1 and 5/8 stub on the flange. Mig weld or braze it on the outside of the flange. De -burr and roll the inside edge ,and you got it. Doubt if it will hurt anything..Might tell you a thing or two. http://www.speedwaymotors.com/Mild-S...Inch,1734.html __________________ "We are lucky we don't get as much Government as we pay for." Will Rogers Last edited by Mark Yacavone; 02-10-2015 at 01:24 PM.