Submitting Parts for NHRA Stock/SS

James L Miller · 09-09-2014, 09:15 PM

I've reviewed the PDF already and came across this line in Paragraph 2.

"All fees and costs, if any, incurred by NHRA in determining whether to approve or disapprove the proposed changes to vehicle design or vehicle components shall be borne by the party submitting the items for review."

From the old 318s I tore apart years ago, the early ones had the four valve relief pistons. I think as they lowered the piston down the hole, the valve notches weren't needed anymore with the .390" lift cam and tiny duration. I don't think there are many people running the early 2bbl engines. I'm sure the smart guys are running the TQ in the late 1970s 318s. I have a 1969 Barracuda, don't have room for another car. It's an original 340 car, so I don't want to put a roll bar in it, so the 318 should put it in R/SA.
.

09-09-2014, 09:15 PM	#5
James L Miller Member Join Date: Apr 2005 Posts: 494 Likes: 6 Liked 25 Times in 16 Posts	Re: Submitting Parts for NHRA Stock/SS I've reviewed the PDF already and came across this line in Paragraph 2. "All fees and costs, if any, incurred by NHRA in determining whether to approve or disapprove the proposed changes to vehicle design or vehicle components shall be borne by the party submitting the items for review." From the old 318s I tore apart years ago, the early ones had the four valve relief pistons. I think as they lowered the piston down the hole, the valve notches weren't needed anymore with the .390" lift cam and tiny duration. I don't think there are many people running the early 2bbl engines. I'm sure the smart guys are running the TQ in the late 1970s 318s. I have a 1969 Barracuda, don't have room for another car. It's an original 340 car, so I don't want to put a roll bar in it, so the 318 should put it in R/SA. . __________________ Mopar 2 Ya!