camshaft change

Mike Taylor 3601 · 10-10-2012, 10:23 AM

Stand height is correct now? adjusters can be adjusted from bottomed against rocker to 2 turns out,if you can adjust valves with adjusters in that range then your pushrods will work if not then you'll need different length.
If you are'nt sure about stand height I would check using tool Jesel used to supply with rocker kit,it is usaully close.

You can measure base circle on cams to compare.
Mike Taylor3601

10-10-2012, 10:23 AM	#3
Mike Taylor 3601 VIP Member Join Date: Oct 2008 Location: Somerset,Ky Posts: 1,369 Likes: 348 Liked 292 Times in 101 Posts	Re: camshaft change Stand height is correct now? adjusters can be adjusted from bottomed against rocker to 2 turns out,if you can adjust valves with adjusters in that range then your pushrods will work if not then you'll need different length. If you are'nt sure about stand height I would check using tool Jesel used to supply with rocker kit,it is usaully close. You can measure base circle on cams to compare. Mike Taylor3601