Weight Distribution Bars

Lew Silverman · 05-13-2010, 10:36 PM

Pete,

10K sounds like a lot of weight for a 1/2T pick-up. You didn't mention how the truck was equipped (engine, trans, rear axle gear ratio), but most small pick-up trucks aren't rated to haul that much weight. There are a number of websites which list the Gross Vehicle Weight and Gross Combined Weight of the various combination's, and depending on how your truck is optioned, you might want to consider a heavier-duty truck. The air-bags are a good idea, but they won't help you when you need to stop! I've been using the Reese Load Equalizing Hitch and Sway Control for years and they work very well if not overloaded.

Good Luck!

Lew

05-13-2010, 10:36 PM	#4
Lew Silverman VIP Member Join Date: Mar 2010 Location: Newport News, VA Posts: 1,435 Likes: 371 Liked 129 Times in 59 Posts	Re: Weight Distribution Bars Pete, 10K sounds like a lot of weight for a 1/2T pick-up. You didn't mention how the truck was equipped (engine, trans, rear axle gear ratio), but most small pick-up trucks aren't rated to haul that much weight. There are a number of websites which list the Gross Vehicle Weight and Gross Combined Weight of the various combination's, and depending on how your truck is optioned, you might want to consider a heavier-duty truck. The air-bags are a good idea, but they won't help you when you need to stop! I've been using the Reese Load Equalizing Hitch and Sway Control for years and they work very well if not overloaded. Good Luck! Lew __________________ Lew Silverman #2070 "The Wagon Master" N/SA