brake troubles

Chad Rhodes · 08-28-2010, 10:15 AM

I'm working on my 92 camaro stocker which has all stock brakes, except a mopar master cylinder and line lock. There is no proportioning valve. I replaced the master cylinder because it was leaking. Prior to that it had brakes, but wouldn't hold the car very well on the starting line. I have bled the brakes repeadedly, i bench bled the master cylinder, but i still have no rear brakes. Anyone have a suggestion?

08-28-2010, 10:15 AM	#1
Chad Rhodes VIP Member Join Date: Jan 2005 Location: Where the Green Grass Grows, AL Posts: 2,375 Likes: 0 Liked 3 Times in 3 Posts	brake troubles I'm working on my 92 camaro stocker which has all stock brakes, except a mopar master cylinder and line lock. There is no proportioning valve. I replaced the master cylinder because it was leaking. Prior to that it had brakes, but wouldn't hold the car very well on the starting line. I have bled the brakes repeadedly, i bench bled the master cylinder, but i still have no rear brakes. Anyone have a suggestion? __________________ Chad Rhodes 2113 I/SA

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode