WTB: SBM W2 59 degree heads

[PPRCuda]

WTB single head or pair of W2 heads.

Please, read carefully what I need;
* heads for 59 degree block
* flat rocker mounts and oiling thru oil channel (version for Jesels oiling thru pushods is not suitable for my engine).
* version with large exhaust bolt pattern
* prefer later version with support ribs round lower head bolts
* both closed and open chamber are doable for my engine

Overseas buyer with Paypal and shipping address in USA.

Please offer heads with no cracks and non or just little ported.

Most optimum heads are bare. Running currently fresh 3870810 heads, but too bad the other head is cracked.

PM to start. Thanks!

PS. No cheating, please. My wallet and *** have been already hurted enough.

[340Cuda]

If you have not done so already you might try posting on Moparts.org.

If you know some of the acceptable part numbers (not casting numbers) that could help also.

Good luck!

[PPRCuda]

Originally Posted by 340Cuda

If you have not done so already you might try posting on Moparts.org.

If you know some of the acceptable part numbers (not casting numbers) that could help also.

Good luck!

Yes, posted also there. Also Facebook W2 -group, FABO etc.

Most wanted head is #3870810 with large exhaust pattern and flat rocker stands.