Comp Cams DLC Hydraulic Flat Tappet Lifter

Stan Weiss · 01-21-2023, 11:44 AM

Has anyone seen or used these? If so any feedback?

https://www.edelbrockgroup.com/wp-co...ters-FINAL.pdf

Stan

Glenn Briglio · 01-21-2023, 12:30 PM

Are these available?

john ancona · 01-21-2023, 12:53 PM

Quote:

Originally Posted by Stan Weiss

Has anyone seen or used these? If so any feedback?

https://www.edelbrockgroup.com/wp-co...ters-FINAL.pdf

Stan

Two key factors ,at what valve seat pressure ,and the open pressure seem to be missing in their statement , were lifters tested at around 200 lbs. on the seat ,and for how long were they tested ,was the cam used a stock eliminator cam ,for me I would ask a lot more questions before I put them in my engine

MR DERBY CITY · 01-21-2023, 05:10 PM

Hey guys, a $120.00 set of SBC lifters will not solve any of my problems ….

nolongerracing · 01-21-2023, 05:25 PM

Quote:

Originally Posted by MR DERBY CITY

Hey guys, a $120.00 set of SBC lifters will not solve any of my problems ….

And from the same company that tells you "not to run a coated lifter on a cast cam"!!

Billy Hampton · 01-22-2023, 12:00 PM

That's each. $1920 for a set of 16.

340Cuda · 01-22-2023, 12:58 PM

Jegs shows they would ship from the manufacture 1/24 "pending manufacturing availability, but as we all know that does not always happen, $119.95 for 16.

With "pro shop" discount $112.75.

MR DERBY CITY · 01-22-2023, 01:59 PM

Quote:

Originally Posted by billy hampton

that's each. $1920 for a set of 16.

damn

Terry Cain · 01-22-2023, 02:05 PM

Time to rethink this lifter rule.

Rob Petrie E395 · 01-22-2023, 05:06 PM

Quote:

Originally Posted by Billy Hampton

That's each. $1920 for a set of 16.

I guess I’m lucky in this case. I’ve got a factory roller cam car. But look at what it costs to do this. If your already in it. What’s $2000 more to keep going. Everyone just has to decide for themselves where that line of spending vs worth it is. Financially it’s dumb to just be involved for 99% of us.

01-21-2023, 11:44 AM	#1
Stan Weiss Senior Member Join Date: Apr 2020 Location: Phila, PA Posts: 793 Likes: 0 Liked 733 Times in 384 Posts	Comp Cams DLC Hydraulic Flat Tappet Lifter Has anyone seen or used these? If so any feedback? https://www.edelbrockgroup.com/wp-co...ters-FINAL.pdf Stan

01-21-2023, 12:30 PM	#2
Glenn Briglio VIP Member Join Date: Nov 2002 Location: Massapequa Park,NY Posts: 1,280 Likes: 1,888 Liked 965 Times in 306 Posts	Re: Comp Cams DLC Hydraulic Flat Tappet Lifter Are these available? __________________ 1989 Camaro Iroc-Z I/SA B&B Auto Machine Shop.

01-21-2023, 05:10 PM	#4
MR DERBY CITY VIP Member Join Date: Feb 2014 Location: Derby City, USA Posts: 3,607 Likes: 1,068 Liked 7,781 Times in 1,494 Posts	Re: Comp Cams DLC Hydraulic Flat Tappet Lifter Hey guys, a $120.00 set of SBC lifters will not solve any of my problems ….

01-22-2023, 12:00 PM	#6
Billy Hampton Junior Member Join Date: Sep 2022 Location: Phoenix Posts: 38 Likes: 26 Liked 54 Times in 19 Posts	Re: Comp Cams DLC Hydraulic Flat Tappet Lifter That's each. $1920 for a set of 16. __________________ Billy/Liam Hampton

01-22-2023, 12:58 PM	#7
340Cuda VIP Member Join Date: Apr 2003 Location: Tulsa, Oklahoma Posts: 1,657 Likes: 3,796 Liked 758 Times in 329 Posts	Re: Comp Cams DLC Hydraulic Flat Tappet Lifter Jegs shows they would ship from the manufacture 1/24 "pending manufacturing availability, but as we all know that does not always happen, $119.95 for 16. With "pro shop" discount $112.75.

01-22-2023, 02:05 PM	#9
Terry Cain Senior Member Join Date: Feb 2008 Location: Georgetown, Indiana (close to Louisville, KY) Posts: 774 Likes: 530 Liked 230 Times in 106 Posts	Re: Comp Cams DLC Hydraulic Flat Tappet Lifter Time to rethink this lifter rule. __________________ Terry Cain ???? STK tcain19689585@gmail.com