Mid-Rise scissor lift

Dragsinger · 09-21-2019, 06:23 PM

I am interested to learn about any experience with a mid-rise scissor lift.

Specifically, brand, who did you buy it from, does it fulfill your need?

cmracing · 09-22-2019, 12:02 PM

I have one from Bendpak. It is pretty good for most things. Pulling a trans is a little tricky, but I can do it. Had to put 2x10's along the sides of it to get some cars on, like my race cars with full exhaust which sit pretty low. Certainly not as easy to work with as a "normal" lift, but it was all I was allowed to do in my town.

Tom Goldman · 09-23-2019, 09:48 AM

Larry , Ive had this Atlas mid rise lift in my shop at home for the race cars for about 8 years and have had no issues with it .
I cut the floor in the garage and sunk it 4" to flush for more clearance for the race cars.
I made a 1/4" aluminum plate to close the opening in between.
Came from Greg Smith Equipment . They have locations all over the country
Looks like they have a location in Arlington .

https://www.gregsmithequipment.com/A...-Mid-Rise-Lift

SSDiv6 · 09-23-2019, 09:44 PM

I know of some people that are very happy with the QuickJack unit.
They are sold by Home Depot and Costco.
They also have an optional items such as pinch blocks and extensions to lift the car a few inches higher.
https://www.quickjack.com/car-lift-systems.html

09-21-2019, 06:23 PM	#1
Dragsinger VIP Member Join Date: Jul 2008 Location: Liberty City [East Texas] Posts: 1,760 Likes: 5 Liked 99 Times in 60 Posts	Mid-Rise scissor lift I am interested to learn about any experience with a mid-rise scissor lift. Specifically, brand, who did you buy it from, does it fulfill your need? __________________ Larry Woodfin 471W

09-22-2019, 12:02 PM	#2
cmracing Member Join Date: Aug 2016 Posts: 173 Likes: 113 Liked 62 Times in 29 Posts	Re: Mid-Rise scissor lift I have one from Bendpak. It is pretty good for most things. Pulling a trans is a little tricky, but I can do it. Had to put 2x10's along the sides of it to get some cars on, like my race cars with full exhaust which sit pretty low. Certainly not as easy to work with as a "normal" lift, but it was all I was allowed to do in my town.

09-23-2019, 09:48 AM	#3
Tom Goldman VIP Member Join Date: Jan 2003 Location: Allentown,PA Posts: 2,476 Likes: 887 Liked 870 Times in 236 Posts	Re: Mid-Rise scissor lift Larry , Ive had this Atlas mid rise lift in my shop at home for the race cars for about 8 years and have had no issues with it . I cut the floor in the garage and sunk it 4" to flush for more clearance for the race cars. I made a 1/4" aluminum plate to close the opening in between. Came from Greg Smith Equipment . They have locations all over the country Looks like they have a location in Arlington . https://www.gregsmithequipment.com/A...-Mid-Rise-Lift __________________ Tom Goldman 1500 SG , 1506 STK Last edited by Tom Goldman; 09-23-2019 at 10:59 AM.

09-23-2019, 09:44 PM	#4
SSDiv6 VIP Member Join Date: Feb 2003 Location: Glendale, Arizona Posts: 3,044 Likes: 712 Liked 1,580 Times in 582 Posts	Re: Mid-Rise scissor lift I know of some people that are very happy with the QuickJack unit. They are sold by Home Depot and Costco. They also have an optional items such as pinch blocks and extensions to lift the car a few inches higher. https://www.quickjack.com/car-lift-systems.html